186,507 research outputs found
Use of Bichat's buccal fat pad for the sealing of orosinusal communications. A presentation of 8 cases
No full textObjectives: To determine the efficacy of the pediculate flap with the buccal fat pad in the sealing of orosinusal communications, describe the surgical technique used, and report the main complications. Patients and method: A retrospective study was made of 8 patients seen in the Service of Oral Surgery of the University of Barcelona Dental Clinic (Spain) for the treatment of orosinusal communications between the years 2007 and 2009. In all cases a pediculate flap with the buccal fat pad was used to solve the problem. Results: All of the orosinusal communications were successfully resolved with this technique. The immediate postoperative complications were pain (37.5%), inflammation (37.5%), edema (32.5%), trismus (37.5%), halitosis (14.3%), suppuration (12.5%) and rhinorrhea (12.5%). Conclusions: The use of Bichat"s buccal fat pad is not regarded as the technique of choice for sealing small to medium sized orosinusal communications. However, in the case of large communications, it is a good option, and the results obtained are optimum
Influence of Process Parameters on the Deformation of Copper Foils in Flexible-Pad Laser Shock Forming
No full textThis paper investigates a new microforming technique, Flexible-Pad Laser Shock Forming (FPLSF), to produce mi-crofeatures on metallic foils without rigid punches and dies. FPLSF uses the laser-induced shock pressure and a flexi-ble-pad to plastically deform metal foils into hemispherical microcraters. In order to understand the deformation characteristics of metal foils in FPLSF, it is necessary to analyze the influence of process parameters on the foil deformation. In this paper, the effects of parameters such as the flexible-pad thickness, confinement layer medium, confinement layer thickness and the number of laser pulses on the depth, diameter and shape of the craters formed on copper foils were investigated. It is found that the flexible-pad thickness should be greater than its threshold value to maximize the deformation of foils. By comparing two different confinement media, namely water and glass, it is observed that hemispherical craters were formed on the copper foils at different laser fluence values tested when using water as the confinement; whereas shockwave ripples were formed on the copper foil at higher laser fluence while using the glass confinement. Using water as confinement medium, an increase in confinement thickness from 4 mm to 7 mm resulted in 48% increase of the crater depth at 7.3 J/cm2. However, at 13.6 J/cm2, reduction in crater depth was observed for thickness greater than 6 mm after an initial increasing trend. Regarding the number of pulses, it is found that increasing the number of pulses from 1 to 3 resulted only in a small increase (less than 1%) in crater depth at 7.3 J/cm2 and 13.6 J/cm2 laser fluence whereas 19.3% increase in depth was observed at larger laser fluence (20.9 J/cm2). It is also observed that the optimum number of pulses to achieve maximum deformation is varying with the laser fluence
An Investigation into the Influence of the Contact Pressure Distribution at the Friction Pair Interface on Disc Brake Squeal
No full textThe main purpose of this thesis is to investigate the dynamic centre of pressure during a noisy brake application. A novel technique is employed to measure the centre of pressure and contact pressure distribution between the disc/pad interfaces during braking events.
The test rig was developed to study the contact pressure distribution between disc/pad interfaces. The caliper and set of pads were modified to measure both static and dynamic centre of pressure during braking events. The brake uses a 12 piston opposed caliper arranged to allow a number of the pistons to be controlled independently using 4 master cylinders. This allows the interface centre of pressure to be adjusted both along the length of the pad and radially. The tests included static pressure measurements with the sensor film between the pad friction face and the disc, the centre of pressure being adjusted using the master cylinders to provide a “system benchmark”. Once the static characteristic behaviour of the modified pad is established, the centre of pressure variation is measured under dynamic conditions. This allows the movement of the centre of pressure to be plotted against brake pressure and rotor speed.
Furthermore, a detailed finite element model of a disc brake assembly is developed. Contact analysis was performed to determine the pressure distribution, interfacial contact area and normal contact forces under both frictionless (μ=0) and frictional braking conditions. The effect of varying friction coefficients and the brake hydraulic pressure is also examined. Preliminary finite element results of contact pressure distribution between the disc/pad interfaces were compared with the experimental results, followed by a detailed modal analysis of disc brake to predict the natural frequencies and the mode shapes of disc brake. In addition, a stability analysis of brake assembly is carried out to distinguish the unstable frequencies. Structure modification of disc brake assembly was also investigated to understand the characteristics behaviour of brake system in terms of squeal noise performance.
It is established from the results that there is a strong relationship between the interface pressure distribution, the effective centre of pressure and the propensity of the brake to generate noise. It is noticed that the centre of pressure may vary both along the pad and radially during braking which adds to the complex analysis of instability.
The finite element results compared well with the experimental results. It is observed that the contact pressure distribution and the magnitude of normal contact forces are much higher towards the leading edge of the pads comparing to the trailing edge. It is also established yet again that with a leading centre of pressure the brake is more prone to noise whereas with a trailing centre of pressure the system is more likely to be stable
Urinary incontinence: A vibration alert system for detecting pad overflow
No full textThis is the author's accepted manuscript. The final published article is available from the link below. Copyright @ 2011 RESNA.A sensor and electronics system is described that monitors the leakage of urine from continence pads into surrounding underwear. Urinary incontinence is involuntary loss of urine and occurs when the bladder muscles contract without warning or the sphincter muscles surrounding the urethra are too weak to prevent leakage. The system comprises a wetness sensor and electronics unit. The sensor is stitched into the underwear and detects overspills of urine from the pad. The electronics unit is attached to the underwear and responds by vibrating, signaling to the wearer that pad has failed. This system has application for individuals who use continence pads in the community, but it could also be used in care homes
Multipoint rational approximants with preassigned poles
No full text20 pages, no figures.-- MSC1991 codes: 41A21, 42C05, 30E10.MR#: MR1820073 (2002i:41021)Zbl#: Zbl 1160.41305Let be a finite positive Borel measure whose support is a compact regular set contained in . For a function of Markov type , z\in\Bbb C\sbs S(\mu), we consider multipoint Padé-type approximants (MPTAs), where some poles are preassigned and interpolation is carried out along a table of points contained in \overline{\Bbb C}\sbs {\rm Co}(S(\mu)) which is symmetrical with respect to the real line. The main purpose of this paper is the study of the `exact rate of convergence' of the MPTAs to the function .Research by first author (F.C.) partially carried out at the Mathematics Department of Umeå University under Guest Scholarship from the Swedish Institute. Research by second author (G.L.L.) partially supported by Dirección General de Enseñanza Superior under grant PB 96-0120-CO3-01 and by INTAS under grant 93-0219 EXT.Publicad
Appropriate Similarity Measures for Author Cocitation Analysis
No full textWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
sj-pdf-1-vmj-10.1177_1358863X241228542 – Supplemental material for Methods, design, and initial results of an angiographic core lab from VOYAGER-PAD
No full textSupplemental material, sj-pdf-1-vmj-10.1177_1358863X241228542 for Methods, design, and initial results of an angiographic core lab from VOYAGER-PAD by R Kevin Rogers, Joerg Herold, Nicholas Govsyeyev, Roberto Iezzi, Justin Morrison, Shea E Hogan, Mark Nehler, Rory Bricker, Brice Andring, Brian Bergmark, Matt Cavender, Emily Malgor, Donald Jacobs, Michael N Young, Warren Capell, Joseph W Yčas, Sonia S Anand, Scott D Berkowitz, E Sebastian Debus, Lloyd P Haskell, Eva Muehlhofer, Manesh R Patel, Connie N Hess, Rupert M Bauersachs, Victoria Anderson and Marc P Bonaca in Vascular Medicine</p
Performance analysis of Pareto optimal bearings subject to surface error variations
No full textA Pareto optimization study was carried out on a flat pad aerostatic bearing design. Some of the Pareto optimal configurations were then subjected to surface profiling errors including tilt, concavity, convexity and waviness and key performance parameters such as load capacity, stiffness and flow rate determined. From these studies it was concluded that multi-orifice aerostatic flat pad bearings are highly sensitive to surface profile variations and these surface profile variations are inherent limitations of the current manufacturing techniques. A technique to account for the sensitivity to manufacturing tolerance within air bearing optimization studies is also proposed
Plantar enthesopathy : thickening of the enthesis is correlated with energy dissipation of the plantar fat pad during walking
No full textBackground: The enthesis of the plantar fascia is thought to play an important role in stress dissipation. However, the potential link between entheseal thickening characteristic of enthesopathy and the stress-dissipating properties of the intervening plantar fat pad have not been investigated. \ud
\ud
Purpose: This study was conducted to identify whether plantar fat pad mechanics explain variance in the thickness of the fascial enthesis in individuals with and without plantar enthesopathy. \ud
\ud
Study Design: Case-control study; Level of evidence, 3. \ud
\ud
Methods: The study population consisted of 9 patients with unilateral plantar enthesopathy and 9 asymptomatic, individually matched controls. The thickness of the enthesis of the symptomatic, asymptomatic, and a matched control limb was acquired using high-resolution ultrasound. The compressive strain of the plantar fat pad during walking was estimated from dynamic lateral radiographs acquired with a multifunction fluoroscopy unit. Peak compressive stress was simultaneously acquired via a pressure platform. Principal viscoelastic parameters were estimated from subsequent stress-strain curves. \ud
\ud
Results: The symptomatic fascial enthesis (6.7 ± 2.0 mm) was significantly thicker than the asymptomatic enthesis (4.2 ± 0.4 mm), which in turn was thicker than the enthesis (3.3 ± 0.4 mm) of control limbs (P < .05). There was no significant difference in the mean thickness, peak stress, peak strain, or secant modulus of the plantar fat pad between limbs. However, the energy dissipated by the fat pad during loading and unloading was significantly lower in the symptomatic limb (0.55 ± 0.17) when compared with asymptomatic (0.69 ± 0.13) and control (0.70 ± 0.09) limbs (P < .05). The sonographic thickness of the enthesis was correlated with the energy dissipation ratio of the plantar fat pad (r = .72, P < .05), but only in the symptomatic limb. \ud
\ud
Conclusion: The energy-dissipating properties of the plantar fat pad are associated with the sonograpic appearance of the enthesis in symptomatic limbs, providing a previously unidentified link between the mechanical behavior of the plantar fat pad and enthesopathy
"Closing the R&D Gap, Evaluating the Sources of R&D Spending"
No full textBoth spending and tax policies have been implemented in the United States with the goal of stimulating private sector research and development (R&D). Karier questions whether current R&D policy, especially the research and experimentation tax credit, can contribute to closing the gap between nondefense expenditures on R&D in the United States and such expenditures in other countries, such as Japan and Germany. He also explores possible changes to our current R&D policy to make it more effective.
- …
