16,379 research outputs found
High-resolution projections of evapotranspiration and water availability for Europe under climate change
Europe-wide high-resolution (1 km) gridded data of estimates of monthly and annual potential evapotranspiration (ET0), annual actual evapotranspiration (AET0) and water availability for a climate normal period largely preceding an anthropogenic warming signal (1961-1990) and for two CMIP5 multimodel future projections (2011-2040 and 2041-2070). In the ET0 calculation, the monthly and annual heat index I and annual α parameter were estimated following the Thornthwaite method, and AET0 was calculated using the Budyko approach.
For citations and more details, please refer to "High-resolution projections of evapotranspiration and water availability for Europe under climate change" by Ştefan Dezsi, Marcel Mândrescu, Dănuţ Petrea, Praveen Kumar Rai, Andreas Hamann, Mărgărit-Mircea Nistor, published in International Journal of Climatology (https://doi.org/10.1002/joc.5537)</p
Recent Results From the EU POF-PLUS Project: Multi-Gigabit Transmission Over 1 mm Core Diameter Plastic Optical Fibers
Recent activity to achieve multi-gigabit transmission over 1 mm core diameter graded-index and step-index plastic optical fibers for distances up to 50 meters is reported in this paper. By employing a simple intensity-modulated direct-detection system with pulse amplitude or digital multi-tone modulation techniques, low-cost transceivers and easy to install large-core POFs, it is demonstrated that multi-gigabit transmission up to 10 Gbit/s over 1-mm core diameter POF infrastructure is feasible. The results presented in this paper were obtained in the EU FP7 POF-PLUS project, which focused on applications in different scenarios, such as in next-generation in-building residential networks and in datacom applications
Extreme Hydrodynamic Loading on Near-Shore Structures
The main objective of this study was to investigate and quantify the impact of extreme hydrodynamic forces, similar to those generated by tsunami-induced inundation, on structural elements. As part of a comprehensive experimental program and analytical study, pressures, base shear forces, and base overturning moments generated by hydraulic bores on structural models of various shapes were studied. In addition, the impact force induced by waterborne wooden debris of different shapes and masses on the structural models was also investigated. Two structural models, one with circular and the other with square cross-section, were installed individually downstream of a dam-break wave in a high-discharge flume. Three impounding water heights (550, 850 and 1150 mm) were used to produce dam-break waves, which have been shown to be analogous to tsunami-induced coastal inundation in the form of highly turbulent hydraulic bores. Time-history responses of the structural models were recorded, including: pressures, base shear forces, base overturning moments, lateral displacements, and accelerations. In addition, the flow depth-time histories were recorded at various locations along the length of the flume. Regular and high-speed video cameras were used to monitor the bore-structure interaction. The effect of initial flume bed condition (“wet” or “dry” bed) on the forces and pressures exerted on the structural models were also investigated. Moreover, the vertical distribution of pressure around the models was captured. Simple low-height walls with various geometries were installed upstream from the structural models to investigate their efficiency as tsunami mitigation measures. The experimentally recorded data were compared with those estimated from currently available formulations. \ud
The results and analysis of the simulated tsunami-induced bore presented in this study will be of significant use to better estimate forces exerted on structures by tsunami-induced turbulent bores. It is expected that this work will contribute to the new ASCE7 Chapter 6 - Tsunami Loads and Effects in which two of this author’s academic supervisors, Drs. Ioan Nistor and Dan Palermo, are members
Extreme Hydrodynamic Loading on Near-Shore Structures
The main objective of this study was to investigate and quantify the impact of extreme hydrodynamic forces, similar to those generated by tsunami-induced inundation, on structural elements. As part of a comprehensive experimental program and analytical study, pressures, base shear forces, and base overturning moments generated by hydraulic bores on structural models of various shapes were studied. In addition, the impact force induced by waterborne wooden debris of different shapes and masses on the structural models was also investigated. Two structural models, one with circular and the other with square cross-section, were installed individually downstream of a dam-break wave in a high-discharge flume. Three impounding water heights (550, 850 and 1150 mm) were used to produce dam-break waves, which have been shown to be analogous to tsunami-induced coastal inundation in the form of highly turbulent hydraulic bores. Time-history responses of the structural models were recorded, including: pressures, base shear forces, base overturning moments, lateral displacements, and accelerations. In addition, the flow depth-time histories were recorded at various locations along the length of the flume. Regular and high-speed video cameras were used to monitor the bore-structure interaction. The effect of initial flume bed condition (“wet” or “dry” bed) on the forces and pressures exerted on the structural models were also investigated. Moreover, the vertical distribution of pressure around the models was captured. Simple low-height walls with various geometries were installed upstream from the structural models to investigate their efficiency as tsunami mitigation measures. The experimentally recorded data were compared with those estimated from currently available formulations.
The results and analysis of the simulated tsunami-induced bore presented in this study will be of significant use to better estimate forces exerted on structures by tsunami-induced turbulent bores. It is expected that this work will contribute to the new ASCE7 Chapter 6 - Tsunami Loads and Effects in which two of this author’s academic supervisors, Drs. Ioan Nistor and Dan Palermo, are members
Employing M1 direct calibration/de-embedding approaches for large signal model validation at mm-wave frequencies
In this contribution, we employ direct calibration/de-embedding approaches to validate the large signal device model of state-of-the-art HBTs and CMOS technologies operating in the mm-wave frequency band WR6. The capability of placing the first tier calibration reference plane in close proximity to the DUT allows the large signal metric to be directly compared with foundry models.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Electronic
Dynamic Estimation of Vital Signs with mm-wave FMCW Radar
In this paper, we propose a method for continuous monitoring of vital signs-in particular, respiration frequency-with a commercial mm-wave radar. The nearly constant frequency (NCF) model is adopted to represent chest displacement due to respiration and simulate radar response. Based on this model, an extended Kalman filter (EKF) based estimator is developed to track the breathing frequency of a person. The impact of dynamic model parameters is investigated in numerical simulation. The possibility to track breathing frequency with the proposed method is demonstrated by experimental data processing. Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Microwave Sensing, Signals & System
A 23-to-29GHz Receiver with mm-Wave N-Input-N-Output Spatial Notch Filtering and Autonomous Notch-Steering Achieving 20-to-40dB mm-Wave Spatial Rejection and -14dBm In-Notch IP1 dB
Digital beamforming receivers (RXs) support MIMO operation and offer great flexibility and accuracy in multi-beam formation and calibration. However, compared with analog phased-array and hybrid systems, due to the absence of any rejection for spatial in-band blockers, the RX/ADC dynamic range and linearity should be high enough to prevent array saturation. Therefore, the use of self-steering spatial notch filters (SNFs) is necessary to aid the digital beamformers and reduce RX/ADC power consumption while strong blockers exist. To address that, the sub-6GHz RXs in [1], [2] synthesize a baseband spatial notch impedance and translate it to RF by passive mixers. However, this technique cannot be directly applied at mm-wave frequencies as the impedance translational performance of the passive mixers degrades significantly. Hence, the mm-wave beamformer in [3] realizes a cascadable SNF at an intermediate frequency (IF). However, the front-end mm-wave components like mixers and phase shifters have to tolerate strong blockers, thus degrading RX linearity. Besides, it uses multiple IF buffers and VGAs for signal scaling and combining, which could be power-hungry if a similar method is adopted to realize a mm-wave SNF. To improve on those limitations, we propose a scalable SNF structure, which (1) suppresses the strongest in-band blocker at mm-wave frequencies, (2) supports N-input-N-output MIMOs, and (3) requires no active blocks except the phase shifters. A two-step autonomous notch-steering technique is also developed to adjust the SNF notch direction power-efficiently and accurately.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Electronic
Experiencing the armed struggle : the Soweto generation and after
Includes bibliographical references (p. 354-369).This study explores the experiences of the rank-and-file soldiers of Umkhonto we Sizwe and the Azanian People's Liberation Anny. Extensive interviews by the author and other researchers reveal the voices of the soldiers themselves. The African National Congress and Pan African Congress archives at the University of the Western Cape and the University of Fort Hare supplement and verify these oral testimonies, as do some published sources. Most previously published materials about the armed struggle against apartheid have already focused on diplomacy, strategy and tactics, operations, leadership, and human rights abuses to the neglect of the soldiers' actual experiences. This study complements these with significant new oral history materials from the Soweto generation of soldiers and their successors. When dealing with MK, many authors have documented issues of the camp structure in Angola, and operations inside South Africa, so much of this detail is only addressed briefly, leaving space to explore the soldiers' experiences. In the case of APLA, very little has been written on its history, and more detail is provided on these subjects. This study therefore deals with the soldiers' politicisation and motivation for joining the armed struggle, their experiences in leaving South Africa and training in exile, the crises in exile which limited their effectiveness for a time, their return to fight in South Africa, and their difficulties in the "new" South Africa. These materials reveal that vast problems remain facing these veterans of the struggle against apartheid, and that they have the potential, if properly supported and employed, to contribute substantially to the development of present day South Africa. Conversely, if their neglect continues, they also have the potential to bring vast harm to the country. Further use of the investigative tools of oral history, especially if extended to the former soldiers' vernacular languages, is necessary to augment the history of South Africa, and these soldiers' contributions
Grouped People Counting Using mm-wave FMCW MIMO Radar
The problem of radar-based counting of multiple individuals moving as a single group is addressed using an mm-wave multiple-input-multiple-output (MIMO) frequency-modulated continuous wave (FMCW) radar. This problem is challenging because the different individuals are closer to each other than the range/azimuth resolution, and their bulk Doppler signatures are difficult to distinguish, as they tend to move together. A processing pipeline is proposed, based on the combination of a multiple target tracking algorithm with a classifier to track each group and count the number of people within. Specific salient features are defined for the classifier and extracted from range-azimuth maps and cadence velocity diagrams (CVDs). The proposed pipeline has been experimentally validated in several outdoor scenarios with grouped people. The results show that the combination of tracking algorithm and classifier in the proposed pipeline outperforms alternative methods from the literature as well as a commercial toolbox for people counting.Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Microwave Sensing, Signals & System
MM Recital
MM RecitalEmbargo status: Restricted until 06/2172. To request the author grant access, click on the PDF link to the left
- …
