30,349 research outputs found
Multiphoton autofluorescence and second harmonic generation microscopy for evaluation of thermal damage of dermis
No full text
Evaluation of dermal thermal damage by multiphoton autofluorescence and second-harmonic-generation microscopy
No full textValues of parameters in the linearized (Lin) and nonlinear (N-Lin) fittings of isotherm models at 60 mg L<sup>-1</sup> Pb<sup>2+</sup> (solution pH = 6±0.2, contact time = 60 min, and adsorbent amount = 0.3 g).
No full textValues of parameters in the linearized (Lin) and nonlinear (N-Lin) fittings of isotherm models at 60 mg L-1 Pb2+ (solution pH = 6±0.2, contact time = 60 min, and adsorbent amount = 0.3 g).</p
Data analyses of honokiol-induced autophagy of human glioma cells in vitro and in vivo
No full textAbstractThis article contains raw and processed data related to a research, “Honokiol induces autophagic cell death in malignant glioma through reactive oxygen species-mediated regulation of the p53/PI3K/Akt/mTOR signaling pathway” (C.J. Lin, T.L. Chen, Y.Y. Tseng, G.J. Wu, M.H. Hsieh, Y.W. Lin, R.M. Chen, 2016) [1]. Data were obtained by immunoblotting analyses of light chain 3 (LC3)-II, beclin-1, Akt, and mTOR in human glioma U87 MG cells and mouse glioma tissues treated with honokiol, an active constituent extracted from the bark of Magnolia officinalis, “Honokiol induces autophagy of neuroblastoma cells through activating the PI3K/Akt/mTOR and endoplasmic reticular stress/ERK1/2 signaling pathways and suppressing cell migration” (P.S. Yeh, W. Wang, Y.A. Chang, C.J. Lin, J.J. Wang, R.M. Chen, 2016) [2]. The processed data show the effects of honokiol on induction of autophagy in human glioma U87 MG cells by analyzing levels of LC3-II, p62, and bectin-1, “Honokiol-induced apoptosis and autophagy in glioblastoma multiforme cells” (K.H. Chang, M.D Yan, C.J. Yao, P.C. Lin, G.M. Lai, 2013) [3]. In addition, chloroquine, a lysosomal inhibitor, was administered to the cells to further confirm honokiol-induced cell autophagy. Sequentially, mice with gliomas were created and treated with honokiol. Amounts of phosphorylated and non-phosphorylated Akt and mTOR in glioma tissues were analyzed to determine the possible mechanisms of honokiol-induced autophagy
Three-dimensional Skin Imaging Using the Combination of Reflected Confocal and Multiphoton Microscopy
No full textStudy on the Mg-Li-Zn ternary alloy system with improved mechanical properties, good degradation performance and different responses to cells
No full textNovel Mg-(3.5, 6.5wt%)Li-(0.5, 2, 4wt%)Zn ternary alloys were developed as new kinds of biodegradable metallic materials with potential for stent application. Their mechanical properties, degradation behavior, cytocompatibility and hemocompatibility were studied. These potential biomaterials showed higher ultimate tensile strength than previously reported binary Mg-Li alloys and ternary Mg-Li-X (X=Al, Y, Ce, Sc, Mn and Ag) alloys. Among the alloys studied, the Mg-3.5Li-2Zn and Mg-6.5Li-2Zn alloys exhibited comparable corrosion resistance in Hank's solution to pure magnesium and better corrosion resistance in a cell culture medium than pure magnesium. Corrosion products observed on the corroded surface were composed of Mg(OH)2, MgCO3 and Ca-free Mg/P inorganics and Ca/P inorganics. In vitro cytotoxicity assay revealed different behaviors of Human Umbilical Vein Endothelial Cells (HUVECs) and Human Aorta Vascular Smooth Muscle Cells (VSMCs) to material extracts. HUVECs showed increasing nitric oxide (NO) release and tolerable toxicity, whereas VSMCs exhibited limited decreasing viability with time. Platelet adhesion, hemolysis and coagulation tests of these Mg-Li-Zn alloys showed different degrees of activation behavior, in which the hemolysis of the Mg-3.5Li-2Zn alloy was lower than 5%. These results indicated the potential of the Mg-Li-Zn alloys as good candidate materials for cardiovascular stent applications. Statement of significance: Mg-Li alloys are promising as absorbable metallic biomaterials, which however have not received significant attention since the low strength, controversial corrosion performance and the doubts in Li toxicity. The Mg-Li-Zn alloy in the present study revealed much improved mechanical properties higher than most reported binary Mg-Li and ternary Mg-Li-X alloys, with superior corrosion resistance in cell culture media. Surprisingly, the addition of Li and Zn showed increased nitric oxide release. The present study indicates good potential of Mg-Li-Zn alloy as absorbable cardiovascular stent material.Accepted Author ManuscriptBiomaterials & Tissue Biomechanic
“Mg” Bone: Ink extrusion-based additive manufacturing of Mg implants
No full textThe treatment of largy bone defect remains challenging in clinics. All the clinically available bone grafts have their own limitations and are not ideal for the treatment. Therefore, developing a new generation of suitable bone substitutes is urgently needed. In the recent years, porous magnesium (Mg) has been extensively studied for orthopedic applications owing to its biodegradability, favorable mechanical properties, and osteopromotive ability. The recent advances in additive manufacturing (AM) provide unprecedented opportunities to design and fabricate porous Mg scaffolds with interconnected porous structures that are favorable for the adhesion and proliferation of bone cells. However, powder bed fusion AM, which is the most commonly used AM technique for fabricating metal structures, has encountered many difficulties in manufacturing Mg due to safety concerns, excessive oxidation, and undesirable compositional variation due to the low boiling temperature of Mg. To alleviate these difficulties, alternative AM techniques that can create highly porous structures at room temperature are highly sought after. The aim of this research was to develop a room-temperature AM technique for manufacturing porous Mg and to characterize the fabricated Mg-based scaffolds in different aspects relevant to their potential applications as bone implants.In this thesis work, we, for the first time, successfully employed extrusion-based 3D printing techniques to fabricate biodegradable porous Mg and Mg-based scaffolds for application in orthopedics. We started with the optimization of the formulated binder system, the printing process, and the subsequent liquid-phase sintering process for the AM of Mg and Mg-based scaffolds. On this basis, a series of Mg and Mg-based porous scaffolds, including Mg alloy and Mg matrix composite scaffolds were successfully fabricated. Then, we conducted comprehensive studies on the microstructure, geometrical characteristics, in vitro biodegradation behavior, mechanical properties, and the in vitro biodegradation and the responses of preosteoblast MC3T3-E1 cells to the fabricated scaffolds to evaluate the ability of the fabricated scaffolds to satisfy the requirements of ideal bone-substituting biomaterials. By modifying the alloy composition and adding bioceramic components, the properties of the Mg scaffolds required were significantly improved as compared to those of the pure Mg specimens. The fabricated Mg-matrix composite scaffolds were shown to be the most promising materials to be further developed for bone substitution. Surface modification could also contribute to bringing the fabricated Mg scaffolds closer to meeting the requirements. Therefore, with proper material design and surface modification, the Mg-based scaffolds fabricated using extrusion-based 3D printing technique constitute a new category of porous Mg-based biomaterials that hold great promise for application as bone substitutes
Extrusion-based additive manufacturing of Mg-Zn alloy scaffolds
No full textPorous biodegradable Mg and its alloys are considered to have a great potential to serve as ideal bone substitutes. The recent progress in additive manufacturing (AM) has prompted its application to fabricate Mg scaffolds with geometrically ordered porous structures. Extrusion-based AM, followed by debinding and sintering, has been recently demonstrated as a powerful approach to fabricating such Mg scaffolds, which can avoid some crucial problems encountered when applying powder bed fusion AM techniques. However, such pure Mg scaffolds exhibit a too high rate of in vitro biodegradation. In the present research, alloying through a pre-alloyed Mg-Zn powder was ultilized to enhance the corrosion resistance and mechanical properties of AM geometrically ordered Mg-Zn scaffolds simultaneously. The in vitro biodegradation behavior, mechanical properties, and electrochemical response of the fabricated Mg-Zn scaffolds were evaluated. Moreover, the response of preosteoblasts to these scaffolds was systematically evaluated and compared with their response to pure Mg scaffolds. The Mg-Zn scaffolds with a porosity of 50.3% and strut density of 93.1% were composed of the Mg matrix and MgZn2 second phase particles. The in vitro biodegradation rate of the Mg-Zn scaffolds decreased by 81% at day 1, as compared to pure Mg scaffolds. Over 28 days of static immersion in modified simulated body fluid, the corrosion rate of the Mg-Zn scaffolds decreased from 2.3 ± 0.9 mm/y to 0.7 ± 0.1 mm/y. The yield strength and Young's modulus of the Mg-Zn scaffolds were about 3 times as high as those of pure Mg scaffolds and remained within the range of those of trabecular bone throughout the biodegradation tests. Indirect culture of MC3T3-E1 preosteoblasts in Mg-Zn extracts indicated favorable cytocompatibility. In direct cell culture, some cells could spread and form filopodia on the surface of the Mg-Zn scaffolds. Overall, this study demonstrates the great potential of the extrusion-based AM Mg-Zn scaffolds to be further developed as biodegradable bone-substituting biomaterials.Biomaterials & Tissue BiomechanicsTeam Peyman TaheriTeam Arjan Mo
Extrusion-based additive manufacturing of Mg-Zn/bioceramic composite scaffolds
No full textThe treatment of femoral nonunion with large segmental bone defect is still challenging. Although magnesium alloys have been considered potential materials for such a treatment, their application is limited by their fast degradation. Adding bioceramic particles into magnesium to form Mg-matrix composites is a promising strategy to adjust their biodegradation rates and to improve their mechanical properties and cytocompatibility further. Here, we developed an extrusion-based additive manufacturing technique to fabricate biodegradable Mg-Zn/bioceramic composite scaffolds ex-situ. Inks carrying a Mg-Zn powder and 5, 10 and 15% β-tricalcium phosphate (TCP) powder particles were investigated regarding the dispersion of β-TCP particles in the inks and viscoelastic properties. Optimally formulated inks were then employed for subsequent 3D printing of porous composite scaffolds. The in vitro biodegradation rate of the scaffolds containing 5% β-TCP decreased to 0.5 mm/y, which falls within the range desired for critical-sized bone substitution. As compared to the monolithic Mg-Zn scaffolds, the elastic moduli and yield strengths of the composite scaffolds were much enhanced, which remained in the range of the cancellous bone properties even after 28 d of in vitro degradation. The Mg-Zn/5TCP and Mg-Zn/10TCP scaffolds also exhibited improved biocompatibility when cultured with preosteoblasts, as compared to Mg-Zn scaffolds. In addition, the ALP activity and mineralization level of the composite scaffolds were much enhanced in the extracts of the composite scaffolds. Taken together, this research marks a great breakthrough in fabricating porous Mg-matrix composite scaffolds that meet several design criteria in terms of appropriate biodegradation rate, mechanical properties, and bioactivity. Statement of significance: The treatment of posttraumatic femoral nonunion with large segmental bone defect is still challenging. In this study, we developed a multi-material extrusion-based additive technique to fabricate porous Mg/bioceramic composite scaffolds for such a treatment. The technique allowed for the fine-tuning of printable inks to optimize the dispersion of micro-sized particles. The relative densities of the struts of the fabricated composite scaffolds reached 99%. The added bioceramic particles (β-TCP) exhibited proper interfacial bonding with the Mg alloy matrix. The porous Mg-based composite possessed desired biodegradability, bone-mimicking mechanical properties throughout the in vitro biodegradation period and improved bioactivity to bone cells. These results demonstrated great prospects of extrusion-based 3D printed porous Mg materials to be developed further as ideal biodegradable bone-substituting materials.Biomaterials & Tissue BiomechanicsPavement Engineerin
- …
