1,721,265 research outputs found
THE OVERCOMING OF THE OUTDATED IDEA OF TRADITIONAL DENTISTRY AS A NECESSARY STEP TOWARDS THE NEW GENERATION OF HIGHLY SKILLED DENTISTS
No full textnon disponibil
Scientific Production in Dentistry: The National Panorama through a Bibliometric Study of Italian Academies
Full text linkBackground. The academic scientific research in the field of dentistry has rapidly increased in the last 20 years under the pressure of the multidisciplinary technological advancements and the growing demand for new predictable and cost-effective techniques and materials. The aim of the present investigation was to analyze the academic scientific production conducted by Italian Academies and Dental Schools. Methods. The list of MED/28 academic researchers, associate and full professors, and academic affiliations was collected from the national database of CINECA to evaluate the scientific output of the Italian Universities. The complete list of scientific contributions and the bibliometric parameters were recorded in the Scopus database. Results. The scientific production of 37 Italian Universities, 416 researchers, and 23689 papers was evaluated. The measurement of total academic papers, citations, h-index, and relative citation ratio (RCR) was calculated. The study data showed an increase of the academic scientific production over the last 5 years. Conclusions. The results presented show how scientific research is increasingly pursued by dental clinicians
The impact of COVID-19 on the scientific production spread: A five-month bibliometric report of the worldwide research community
Full text linkIntroduction: The recent COVID-19 pandemic has gained recently a deep increasing of research interest in all fields of the human knowledge due to prevention of the Sars-Cov-2 infection and disease treatment The present investigation evaluated the topic publications and the citation network analysis during the early phases of COVID-19 pandemic spread.
Methods: the Boolean search was performed according to the Pubmed Mesh terms by by Scopus Elsevier database. The papers, co-authors, number of citations obtained and scientific journals were recorded.
Results: a total of 164 scientific journals were assessed in the present research with a mean impact factor value of 4.612±8.705 (range: 70.67-0; median: 2,687, Q1: 0,701; Q3: 4,928).
Conclusions: The studies selected showed The bibliometric research showed an early representation of the research orientation of the research activity about COVID 19. The most represented scientific fields concerned with healthcare and medicine, while for the social and economic fields are gaining interests due to the pandemic spread
The effects of erbium-doped yttrium aluminum garnet laser (Er: YAG) irradiation on sandblasted and acid-etched (SLA) titanium, an in vitro study
Full text linkThe treatment of peri-implantitis implies the decontamination of the surface of the fixture. This study aims to analyze the effect of the erbium-doped yttrium aluminum garnet laser (Er: YAG) on sandblasted and acid-etched (SLA) titanium. 30 titanium SLA disks were divided into three groups. In Group 1, the disks were left intact; on the contrary, both Groups 2 and 3 were irradiated with the Er: YAG laser at different settings, with a pulse duration of 300 μs and a period of 30 s. Group 2 was irradiated at 1 W and 100 mJ/pulse and Group 3 at 4 W and 400 mJ/pulse. The superficial changes at chemical, nano, and microscopical levels were detected through the use of Fourier-transform infrared spectroscopy, atomic force microscopy, and scanning electron microscope. The Kruskal-Wallis test, followed by the Dunn-Bonferroni Post Hoc analysis, detected the presence of statistically significant differences among the groups. The level of significance was p ≤ 0.05. Results showed that Er: YAG irradiation promoted a significant (p < 0.05) increase of oxides and a decrease of microscopical roughness and porosity on SLA disks. However, the protocol tested on group 3 seemed to be too aggressive for the titanium surface, as shown by the presence of micro-cracks and signs of coagulation, melting, and microfractures. In conclusion, Group 2 showed significantly minor surface alterations with respect to Group 3, and the increase of superficial oxide level, the decrease of porosity, and micro-roughness represent a positive alteration that could protect the materials against bacterial adhesion
Noninvasive in-vivo imaging of oral mucosa: State-of-the-art
No full textTechnological development has interested most of the dentistry's branches leading to the use of other medical technologies non previously involved in dental practice. This study aims to evaluate the potential role of non-invasive imaging techniques in oral pathology workflow. Optical coherence tomography has been described by several authors as a promising aid for differential diagnosis of autoimmune diseases and to detect epithelial subversion of the oral mucosa before the clinical manifestation of oral mucositis. High-frequency ultrasound offers the chance to assess lesional dimensions both in benign and malignant lesions with a high dimensional reliability compared with histopathology. Reflectance confocal microscopy seems to be helpful in the early detection of cytological changes due to its high resolution, suggesting a more interesting role in the analysis of malignant lesions. The study presented highlighted the potential role of noninvasive in vivo imaging although further studies are needed for the further validation of these techniques
Oral infection by staphylococcus aureus in patients affected by white sponge nevus: A description of two cases occurred in the same family
Full text linkIntroduction. White Sponge Nevus (WSN) is a rare pathology with a pathogenesis on genetic basis, a benign course and a localization affecting the mucosal keratin. WSN is usually a symptomless pathology: when pain is present, some authors reported reduction of symptoms by taking penicillin or oral tetracycline rinses, suggesting that a bacterial overinfection could be at the base of possible painful symptoms. Case Report. We describe 2 patients affected by WSN, father and son: they presented two different oral diseases associated with an infection by Staphylococcus aureus. So, we have performed a careful oral hygiene to reduce infection in the oral cavity. In the following days we prescribed 2 rinses a day with a mouthwash containing chlorhexidine digluconate at two different percentages. Discussion. Early diagnosis of this lesion is important, because it allows us to exclude other more serious diseases. In the most part of cases, WSN requires no treatment because of its benign and asymptomatic behaviour: up to now, no protocol of treatment for this condition was standardized. Even if WSN is a painless condition, sometime a correlated painful symptomatology was reported. Conclusions. In our experience, we have achieved excellent results even with chlorhexidine digluconate rinses, considering that our treated cases were both infected by Staphylococcus aureus. We hypothesize that the corrugated plaques and the altered texture of the mucosa create the right conditions for the colonization and the development of microbial species such as sap-rophytic bacteria or fungal species. © Ivyspring International Publisher
Maxillary Sinus Osteoma as a Support for Dental Implant Associated to Sinus Augmentation Procedure: A Case Report and Literature Review
Full text linkBackground: Maxillary sinus augmentation is a method extensively used to restore sufficient bone volume in the posterior maxilla to allow for the placement of fixtures. The purpose of the present case report was to describe a rare case of sinus osteoma used for implant support and to review the relevant literature. Materials and Methods: A 58-year-old man with a radiopaque intrasinusal lesion was referred for rehabilitation of the maxilla. The lesion was probably an osteoma and involved the nasal wall of the maxillary sinus. After discussing the options with the patient, he agreed to maintain the lesion and a sinus augmentation with a bone graft. A part of the osteoma was partially removed for histological analysis while avoiding perforation or tearing of the schneiderian membrane. After six months, 6 implants (Bone System Implant, Milano, Italy) were placed in the maxilla, two of which were inserted in the osteoma. Results: The two implants placed in the osteoma were perfectly osseointegrated. The graft material appeared well-integrated with no local signs of inflammation. No postoperative events or symptoms were reported after the surgery stages and at a 6-month follow-up. Regarding the two implants placed in the osteoma: article selection identified 9 case reports, 2 case series, and 1 retrospective study for a total of 58 subjects, 35 males and 25 females. The patients’ ages were heterogeneous and ranged between 12 and 79 years old. Conclusions: In the present case, we decided to leave the osteoma because it was asymptomatic and used as dental implant support. The effectiveness of the present investigation can provide useful guidance for surgeons and dentists in the management of similar clinical situations. © 2022 by the authors. Licensee MDPI, Basel, Switzerland
Use of recombinant factor vila (novoseven®) in the treatment of two patients with type iii von willebrand’s disease and an inhibitor against von willebrand factor
No full textTwo siblings affected by type III von Willebrand’s disease with precipitating alloantibodies against von Willebrand’s factor (vWF) and not susceptible to treatment with factor VIII/ vWF concentrates received recombinant activated factor VII for oral surgery. This therapy, combined with antifibrinolytic drugs and local application of fibrin glue, seems to be effective and safe. It may be considered a promising approach to the management of this rare condition. © 1996 S. Karger AG, Basel
New Implant Design with Midcrestal and Apical Wing Thread for Increased Implant Stability in Single Postextraction Maxillary Implant
Full text linkBackground. The immediate placement of a dental implant could represent an option treatment for the rehabilitation of a postextractive missing tooth socket to replace compromised or untreatable teeth, with the advantage of single-session surgery. In this way, the anatomy of the alveolar bone defect, the preservation of the buccal cortical bone, and the primary stability of the fixture represent the critical factors that consent a precise implant placement. Objective. This case report describes a novel fixture design for postextractive alveolar socket immediate implant. Methods. Two patients (25 and 31 years old) were treated for postextractive dental implant placement to replace both central upper incisor teeth with four implants. The residual bone implant gap was not filled with graft or bone substitute. The restoration was provided following a standard loading protocol by a cement-sealed prosthetic abutment. Results. Clinically, all implants positioned showed an excellent insertion torque. No postoperative complications were reported. At 6 months of healing, the buccal cortical bone and the implant stability were present and well maintained. Conclusion. The evidence of this study allows us to underline the possible advantages of this new fixture design for postextractive implant technique
Three-point bending tests of zirconia core/veneer ceramics for dental restorations
No full textIntroduction. The mechanical strength and the surface hardness of commercially available yttrium-doped zirconia were investigated. Furthermore, a comparative study of eight different ceramic veneers, to be used for the production of two-layered all-ceramic restorative systems, was carried out. Materials and Methods. Four types of zirconia specimens were analyzed, according to a standard ISO procedure (ISO 6872). Besides, two-layered zirconia-veneer specimens were prepared for three-point bending tests. Results. A strong effect of the surface roughness on the mechanical strength of zirconia specimens was observed. Finally, a comparative study of eight commercially available veneering ceramics shows different modes of failure between the selected veneers. Conclusion. The results indicate that close attention should be paid to the preparation of zirconia-based crowns and bridges by CAD/CAM process, because surface roughness has an important effect on the mechanical strength of the material. Finally, the results of the mechanical tests on two-layered specimens represent an important support to the choice of the veneering ceramic. Copyright © 2013 Massimo Marrelli et al
- …
