304 research outputs found
The relation of fetal colon and rectum diameters with labor in healthy late-third trimester pregnancies
Inan, Cihan (Trakya Author)
Sayin, N. Cenk (Trakya Author)
Dolgun, Z. Nihal (Trakya Author)
Erzincan, Selen Gursoy (Trakya Author)
Uzun, Isil (Trakya Author)
Sutcu, Havva (Trakya Author)
Varol, Fusun (Trakya Author)Objective: To investigate the associations of fetal colon-rectum diameters with labor and fetal distress or meconium passage in healthy pregnancies in the late 3rd trimester. Study design: A total of 162 healthy, singleton pregnant women at >= 36(0/7) weeks who were in the latent phase of labor (n = 69) or those not in labor (n = 93, controls) at the time of ultrasound examination were enrolled. Fetal colon (ascending, transverse, descending, sigmoid) and rectum diameters, Doppler indices of materno-fetal vessels were measured. Data were analyzed according to the mode of delivery. Results: Fetal colon-rectum diameters were smaller in women in labor compared to controls (p = 0.001). Positive correlations were observed between fetal colon-rectum diameters and interval between ultrasound and labor onset in the control group except for those who had scheduled cesarean sections (C/S) (p = 0.001). Similar colon-rectum measurements were obtained in fetuses delivered via cesarean section due to fetal distress or to other indications (p>0.05). In women who had uterine contractions during ultrasound examination; later delivered by vaginal route, no association was observed between Apgar scores and colon-rectum diameters during latent-phase (p > 0.05), and also there were significant positive correlations between different segments of colon-rectum diameters and duration of neonatal meconium passage (p < 0.05). Conclusion: Fetal colon and rectum diameters are smaller during labor and the measurements tend to diminish as the labor approaches, but do not indicate fetal distress. (C) 2018 Elsevier By. All rights reserved
Correlation between ovarian morphology and biochemical and hormonal parameters in polycystic ovary syndrome
Objective: To determine the biochemical and hormonal differences in polycystic ovary syndrome (PCOS) patients with and without polycystic ovary (PCO) morphology and to evaluate the outcomes resulting from those differences. Methods: The study included a total of 83 patients with PCOS; 43 of them had PCO morphology (Group-I) and 40 did not (Group-II). Serum LDL, HDL, total cholesterol, triglyceride (TG), total testosterone (T), follicle stimulating hormone (FSH), luteinizing hormone (LH), 17b-estradiol (E2), prolactin (PRL), thyroid stimulating hormone (TSH), sex hormone binding globulin (SHBG), glucose and insulin levels were determined. Homoeostatic model assessment insulin resistance (HOMA-IR) index was calculated. Results: The two groups were similar with respect to BMI. The systolic and diastolic blood pressure measurements of Group-I were significantly lower (p<0.01). Serum mean level of LH (p=0.026) and the mean LH/FSH (p=0.001) level of Group-I were significantly higher than Group-II. The total cholesterol and triglyceride levels of Group-I were significantly lower (p<0.05, p<0.01). The mean HOMA-IR level of Group-I was significantly lower than Group-II (p=0.004). Conclusions: The group without PCO morphology had a higher risk than the other group in terms of increased insulin resistance, dyslipidemia and cardiovascular diseases due to effects of hyperandrogenism
Analysis of patients receiving magnesium sulfate forobstetric reasons
Tıpta UzmanlıkBu çalışmada, obstetrik nedenlerle magnezyum sülfat alan hastaların değerlendirilmesi amaçlanmıştır. Bu amaçla hastaların yaşları, gravida, parite bilgileri, doğum haftaları, magnezyum sülfat alma zamanları gibi değişkenler değerlendirilmiş; ayrıca hemoglobin, platelet, aspartat aminotransferaz ,alanin aminotransferaz , üre, kreatinin gibi değerleri de magnezyum sülfat alma durumu çerçevesinde incelenmiştir. 01.01.2009 – 01.01.2023 tarihleri arasında Trakya Üniversitesi Kadın Doğum Servisi'ne yatırılarak takipleri sırasında preeklampsi, eklampsi nedenleriyle ve nöroprotektif amaçlı magnezyum sülfat kullanılan gebelerin obstetrik ve neonatal sonuçları araştırılmıştır. Araştırmada toplam 535 gebenin verileri incelenmiştir. Nöroprotektif amaçlı tedavi uygulanan gebe sayısı 191 (%35,7), postnatal eklampsi profilaksisi amaçlı tedavi uygulanan gebe sayısı 259 (%48,4) ve antenatal eklampsi tedavisi/profilaksisi uygulanan gebe sayısı 85'tir (%15,9). En yüksek yüzdeye sahip grup postnatal eklampsi profilaksisi/tedavisi ve en düşük yüzdeye sahip grup antenatal eklampsi profilaksisi/tedavisi grubudur. Nöroprotektif amaçlı magnezyum sülfat verilen kadınlarda tedavinin verilme zamanı, doğum zamanı daha erken bulunmuştur. Ayrıca bu gebelerde hemoglobin, üre, kreatinin, sistolik ve diastolik kan basıncı miktarı daha az, platelet miktarı daha yüksektir. Postnatal eklampsi profilaksisi/tedavisi nedeniyle tedavi verilen kadınlarda ise aspartat aminotransferaz miktarı daha yüksek bulunmuştur. Antenatal eklampsi profilaksisi/tedavisi amaçlı magnezyum sülfat verilen kadınlarda 24 saatlik idrar miktarı daha fazla tespit edilmiştir.This study aims to evaluate patients receiving magnesium sulfate for obstetric reasons. In this context, factor ssuch as patients' ages, gravidity, parity information, gestational weeks, timing of magnesium sulfate administration, as well as values such as hemoglobin, platelet count, aspartate aminotransferase,alanine aminotransferase , urea, and creatinine, were assessed in the context of magnesium sulfate administration. Obstetric and neonatal outcomes of pregnant women admitted to the Trakya University Obstetrics Department for follow-up between January 01, 2009, and January 01, 2023, and who received magnesium sulfate for preeclampsia, eclampsia, preterm labor, and neuroprotective purposes, were investigated. A total of 535 women's data were examined. The number of pregnant women receiving neuroprotective treatment is 191 (35.7%), the number of pregnant women receiving postnatal eclampsia prophylaxis treatment is 259 (48.4%), and the number of pregnant women receiving antenatal eclampsia treatment/prophylaxis is 85 (15.9%). The group with the highest percent age is the postnatal eclampsia prophylaxis group, and the group with the lowest percentage is the antenatal eclampsia treatment/prophylaxis group.In women receiving magnesium sulfate for neuroprotective purposes, the timing of treatment and delivery was found to be earlier. Additionally, in these pregnant women, hemoglobın, urea, creatinine, systolic and diastolic blood pressure levels were lower, and platelet count was higher. Women who received treatment for postnatal eclampsia prophylaxis had higher aspartate aminotransferase levels. In women receiving magnesium sulfate for antenatal eclampsia treatment, a greater amount of urine output was detected over 24 hours
Azerbaijan and Azerbaijanis in the short story book of Cihan Aktaş titled
Düşünce, inceleme kitaplarıyla olduğu kadar öyküleriyle de tanınan Cihan Aktaş, 1992 – 2009 yılları arasında dokuz öykü kitabı yayımlamıştır. Özellikle Azize’nin Son Günü (1997) adlı öykü kitabında olmak üzere, öykülerinde Azerbaycan’dan ve Azeri Türklerinden bahseden yazar, bu metinlerde gerek Azeri Türklerinden ilginç portreleri edebiyatımıza kazandırmakta, gerekse Azerbaycan kültürüyle, folkloruyla, sosyal ve siyasi hayatıyla, ekonomik şartlarıyla ilgili önemli bilgiler aktarmaktadır. Ayrıca başta Baku olmak üzere Azerbaycan coğrafyasına ve çevre bölgelere ilişkin izlenimlerini öyküleştirmektedir. Bu makalede, Cihan Aktaş’ın Azize’nin Son Günü adlı öykü kitabına yansıyan Azerbaycan ve Azeri Türkü imgesi/algısı incelenmeye çalışılacaktır.Cihan Aktaş who is known by his books of thought and review as well as short stories published nine short story books between 1992 and 2009. The author, who refers to Azerbaijan and Azerbaijanis, especially in his short story book titled the Last Day of Azize (1997), either brought interesting portraits of Azerbaijani Turks in these texts or conveyed important information related to the culture, folklore, social and political life and economical conditions of Azerbaijan. He also narrated his impressions related to Azerbaijan geography and environmental area, especially to Baku. In this article, we will attempt to understand image/perception of Azerbaijan and Azerbaijanis reflecting on the book of Cihan Aktaş titled &#8220;the Last Day of Azize&#8221;
Cihan Aktaş’ın "Azize’nin Son Günü" adlı öykü kitabında Azerbaycan ve Azeriler
Düşünce, inceleme kitaplarıyla olduğu kadar öyküleriyle de tanınan Cihan Aktaş, 1992 – 2009 yılları arasında dokuz öykü kitabı yayımlamıştır. Özellikle Azize’nin Son Günü (1997) adlı öykü kitabında olmak üzere, öykülerinde Azerbaycan’dan ve Azeri Türklerinden bahseden yazar, bu metinlerde gerek Azeri Türklerinden ilginç portreleri edebiyatımıza kazandırmakta, gerekse Azerbaycan kültürüyle, folkloruyla, sosyal ve siyasi hayatıyla, ekonomik şartlarıyla ilgili önemli bilgiler aktarmaktadır. Ayrıca başta Baku olmak üzere Azerbaycan coğrafyasına ve çevre bölgelere ilişkin izlenimlerini öyküleştirmektedir. Bu makalede, Cihan Aktaş’ın Azize’nin Son Günü adlı öykü kitabına yansıyan Azerbaycan ve Azeri Türkü imgesi/algısı incelenmeye çalışılacaktır.Cihan Aktaş who is known by his books of thought and review as well as short stories published nine short story books between 1992 and 2009. The author, who refers to Azerbaijan and Azerbaijanis, especially in his short story book titled the Last Day of Azize (1997), either brought interesting portraits of Azerbaijani Turks in these texts or conveyed important information related to the culture, folklore, social and political life and economical conditions of Azerbaijan. He also narrated his impressions related to Azerbaijan geography and environmental area, especially to Baku. In this article, we will attempt to understand image/perception of Azerbaijan and Azerbaijanis reflecting on the book of Cihan Aktaş titled &#8220;the Last Day of Azize&#8221;
Düz konik dişlilerin sayısal denetimli freze tezgahlarında hassas şekilde açılmasının tasarımı ve imalatı / The Design and manufacturing of straight bevel gears accurately in CNC milling machines
Determination of utilization from spent broiler chicken meat in dried snack meat production
Fen Bilimleri Enstitüsü, Gıda Mühendisliği Ana Bilim DalıBu çalışmada ekonomik verim dönemini tamamlamış (çıkma) tavuk göğüs etleri farklı marinatlarla (su/kontrol- S grubu, kivi suyu/K grubu, zencefil suyu/ Z grubu, transglutaminaz enzimi/ T grubu) marine edilmiş ve daha sonra pişirilip kurutulmaları sonucunda elde edilen kurutulmuş atıştırmalık et ürünlerinin bazı kalite özellikleri araştırılmıştır. Bu amaçla atıştırmalık et ürünleri MAP ve vakum ambalaj gereçleri ile paketlendikten sonra hem oda sıcaklığında hem de buzdolabı şartlarında 90 gün süreyle depolanmışlardır. Bu süreçte meydana gelen bazı fizikokimyasal (%nem, renk, aw, pH, %toplam asitlik ve thiabarbiturik asit), mikrobiyolojik (toplam koliform bakteri sayısı, Salmonella varlığı, toplam aeorobik mezofilik bakteri sayısı, toplam maya-küf sayısı), teknolojik (%marinat absorblama, %sızıntı kaybı, %pişirme kaybı, %verim), tekstürel (sertlik, dış yapışkanlık, esneklik, çiğnenebilirlik, gamsılık, geri kazanım) ve duyusal özellikleri belirlenmiştir. Örneklerin %nem içeriği 29,71-33,00 ve aw değeri 0,74-0,78 arasında belirlenmiştir. Örneklerin depolamaya bağlı olarak zamanla L*(parlaklık) ve b*(sarılık) değerinin düştüğü, a*(kırmızılık) değerinin ise arttığı tespit edilmiştir. pH değerleri ortalama 6,12-6,23 arasında olup depolamaya bağlı olarak artış göstermiştir. Örneklerin toplam asitliği %0,22-%0,25 (laktik asit) arasında, TBA miktarları ise 0,089-0,116 mg malonaldehit/kg arasında tespit edilmiş olup marinasyon uygulanan örneklerin lipit oksidasyon değerleri daha düşük bulunmuştur. Örneklerin mikrobiyal yükünün depolama süresiyle birlikte arttığı tespit edilmiştir. Zamana bağlı olarak, atıştırmalık kurutulmuş etlerin tekstürel özelliklerinden sertlik, çiğnenebilirlik, dış yapışkanlık, esneklik ve gamsılık değerlerinin genel olarak arttığı belirlenmiştir. Örnek grupları arasında duyusal değerlendirme sonuçlarına göre en yüksek puana Z grubundaki örneklerin sahip olduğu tespit edilmiştir.In this study, breast meat from spent hens (end-of-lay hens) was marinated with different marinades (water/control- S group, kiwi juice/K group, ginger juice/Z group, transglutaminase enzyme/T group) and subsequently cooked and dried to obtain dried snack meat products. For this purpose, the snack meat products were packaged with MAP and vacuum packaging materials and stored for 90 days at both room temperature and refrigerator conditions. Various physicochemical (moisture content, color, water activity (aw), pH, total acidity percentage, and thiobarbituric acid), microbiological (total coliform count, presence of Salmonella, total aerobic mesophilic bacteria count, total yeast-mold count), technological (marinade absorption percentage, drip loss percentage, cooking loss percentage, yield percentage), textural (hardness, adhesiveness, elasticity, chewiness, gumminess, recovery), and sensory properties were determined. The moisture content of the samples was found to be between 29.71-33.00% and the aw value ranged between 0.74-0.78. It was observed that the L* (lightness) and b* (yellowness) values decreased, while the a* (redness) value increased over time during storage. The pH values were on average between 6.12-6.23 and increased with storage time. The total acidity (as lactic acid) ranged from 0.22-0.25%, and the TBA values were between 0.089-0.116 mg malonaldehyde/kg, with lower lipid oxidation values found in marinated samples. The microbial loads of the samples increased with storage time. Over time, the hardness, chewiness, adhesiveness, elasticity, and gumminess values of the samples generally increased, while the recovery value increased up to the 30th day and then decreased. The Z group samples received the highest sensory evaluation scores
Düz konik dişlilerin sayısal denetimli freze tezgahlarında hassas şekilde açılmasının tasarımı ve imalatı / The Design and manufacturing of straight bevel gears accurately in CNC milling machines
Düz konik dişlilerin sayısal denetimli freze tezgahlarında hassas şekilde açılmasının tasarımı ve imalatı / The Design and manufacturing of straight bevel gears accurately in CNC milling machines
Hatalı imal edilen mil çaplarının, L2 tipi keçe ömürleri üzerine olan etkilerinin araştırılması / An Investigation of the effects on the L2 type seal lifes of erroneously manufactured shaft diameters
- …
