128,775 research outputs found
History of the Hopping family in England and genealogy of the John Hopping family in America /
No full textIncludes indexes.Supplement by L. M. Hopping (95 p.) issued in 1973 and bound with the main work.Mode of access: Internet
Multi-group frequency hopping OFDMA based on statistical multiplexing
No full textIn this paper, the multi-group frequency hopping OFDMA (MG-FH OFDMA) based on the statistical multiplexing is proposed for the downlink cellular system. Compared with the existed random frequency hopping OFDMA (RFH-OFDMA) system utilizing the statistical multiplexing, the proposed MG-FH OFDMA invokes the deterministic hopping pattern to reduce the number of subcarrier collisions. By dividing all users into different groups, the subcarriers are utilized sufficiently. Latin Square hopping pattern and user index updating scheme are applied to randomize the subcarrier collisions among users. The user capacity, defined as the maximum number of users served with a basic data-rate in a cell, is calculated with the consideration of intra-cell capacity and the other cell interference (OCI). Results show that the proposed MG-FH OFDMA achieves higher user capacity than that of the RFH-OFDMA
Slow Frequency-Hopping Multicarrier DS-CDMA for Transmission over Nakagami Multipath Fading Channels
No full textA novel multiple access scheme based on slow frequency hopping multicarrier direct-sequence code division multiple access (SFH/MC DS-CDMA) is proposed and investigated, which can be rendered compatible with the existing second-generation narrowband CDMA and third-generation wideband CDMA systems. The frequency hopping patterns are controlled by a set of constant-weight codes. Consequently, multirate communications can be implemented by selecting the corresponding sets of constant-weight codes having the required weights controlling the SFH patterns invoked. Two FH schemes, namely random and uniform FH, are considered and their advantages as well as disadvantages are investigated. We assume that the system operates in a multipath fading environment and a RAKE receiver structure with maximum ratio combining (MRC) is used for demodulation. The system’s performance is evaluated over the range of multipath Nakagami fading channels, under the assumption that the receiver has an explicit knowledge of the associated frequency-hopping (FH) patterns invoked. Furthermore, the performance of the SFH/MC DS-CDMA system is compared to that of the conventional single-carrier (SC) DS-CDMA system and that of the conventional MC DS-CDMA system, under the assumptions of constant system bandwidth and of constant transmitted signal power. Index Terms—Code division multiple access, constant-weight code, frequency hopping, Nakagami fading, orthogonal frequency division multiplexing
Blind Joint Soft-Detection Assisted Slow Frequency-Hopping Multicarrier DS-CDMA
No full textA novel multiple-access scheme based on slow frequency-hopping multicarrier direct-sequence, code-division multiple access (SFH/MC DS-CDMA) is proposed and investigated, which can be rendered compatible with the existing second-generation narrow-band CDMA and third-generation wide-band CDMA systems. Blind joint soft-detection of the SFH/MC DS-CDMA signals is investigated, assuming that the receiver has no knowledge of the associated frequency-hopping (FH) patterns invoked. The system’s performance is evaluated over the range of Nakagami multipath fading channels. The results show that blind joint soft-detection achieves the required bit-error rate performance, while blindly acquiring the FH patterns employed. This is advantageous during the commencement of communications or during soft handover. Index Terms—Blind detection, code-division multiple access, constant-weight codes, frequency-hopping, orthogonal frequency-division multiplexing
Time-Hopping Multicarrier Code-Division Multiple-Access
No full textA time-hopping multicarrier code-division multiple-access (TH/MC-CDMA) scheme is proposed and investigated. In the proposed TH/MC-CDMA each information symbol is transmitted by a number of time-domain pulses with each time-domain pulse modulating a subcarrier. The transmitted information at the receiver is extracted from one of the, say , possible time-slot positions, i.e., assuming that -ary pulse position modulation is employed. Specifically, in this contribution we concentrate on the scenarios such as system design, power spectral density (PSD) and single-user based signal detection. The error performance of the TH/MC-CDMA system is investigated, when each subcarrier signal experiences flat Nakagami- fading in addition to additive white Gaussian noise (AWGN). According to our analysis and results, it can be shown that the TH/MC-CDMA signal is capable of providing a near ideal PSD, which is flat over the system bandwidth available, while decreases rapidly beyond that bandwidth. Explicitly, signals having this type of PSD is beneficial to both broadband and ultra-wide bandwidth (UWB) communications. Furthermore, our results show that, when optimum user address codes are employed, the single-user detector considered is near-far resistant, provided that the number of users supported by the system is lower than the number of subcarriers used for conveying an information symbol
Low-Complexity Reduced-Rank Adaptive Detection in Hybrid Direct-Sequence Time-Hopping Ultrawide Bandwidth Systems
No full textAbstract — In this contribution reduced-rank adaptive minimum mean-square error multiuser detector (MMSE-MUD) is proposed and investi-gated for the hybrid direct-sequence time-hopping ultrawide bandwidth (DS-TH UWB) systems. The adaptive MMSE-MUD is operated based on the normalised least mean-square (NLMS) principles associated with using Taylor polynomial approximation (TPA)-assisted reduced-rank technique. It can be shown that the reduced-rank adaptive technique is beneficial to achieving low-complexity, high convergence speed and robust detection in hybrid DS-TH UWB systems. In this contribution bit-error-rate (BER) performance of the hybrid DS-TH UWB systems using proposed reduced-rank adaptive MMSE-MUD is investigated, when communicating over UWB channels modelled by the Saleh-Valenzuela (S-V) channel model. Our simulation results show that the TPA-assisted reduced-rank adaptive MMSE-MUD is capable of achieving a similar BER performance as that of the full-rank adaptive MMSE-MUD but with significantly lower detection complexity. I
Production and performance of thin and thick film NTCR thermistors based on NiMn(_2)O(_4)+δ
No full textIn this study reliable film type NTCR thermistors based on NiMn(_2)O(_4)+δ were produced and their electrical properties were studied in detail. Electron-beam evaporation procedures have been applied to produce thin film NTCR thermistors. Phase pure NiMn(_2)O(_4)+δ target material was produced via a traditional ceramic precursor oxide route and thin films were deposited in an optimised procedure. The thickness distribution of evaporated films showed good agreement with a theoretical model, derived from evaporation theory and the sticking coefficient of the vapour on the substrates was approximately 80% ± 1.5%. The composition of electron-beam evaporated films was found to be not controllable in terms of the phase purity and the Ni : Mn ratio. In order to avoid these problems thick film NiMn(_2)O(_4)+δ NTCR thermistors were developed using direct screen-printing techniques. Detailed Rietveld refinement analysis was carried out for the source powder used for screen-printing. The main focus of the work was the measurement of resistance-temperature (R-T) characteristics of thin and thick films and pellets. In the temperature range of concern (77 K -550 K) conduction was found to be by variable-range hopping (VRH) and nearest-neighbour hopping (NNH); R ~ exp (TʆT)(^p), where the index p depends on the mode of hopping. Detailed analysis of R-T data showed that screen-printed films and pellets exhibited a p-value of 0.5, which was identified with VRH with a parabolic density of states (DOS) with an exponential dependence of resistance: R ~ exp (TʆT)(^0.5). For electron-beam evaporated films the mechanisms detected were NNH: R ~ exp (TʆT); and VRH with a constant DOS {p = 0.25) following: R ~ exp (TʆT)(_0.25). For screen-printed films with incorporated glass phase the electrical conduction mechanism was analysed using a.c. impedance spectroscopy and at low frequencies the hopping conduction was in agreement with the d.c. behaviour. The time constant of this mechanism could be described by an equivalent circuit containing a RC element. For higher frequencies a second mechanism was found, best described by a CRL element
Graph kernel extensions and experiments with application to molecule classification, lead hopping and multiple targets
No full textThe discovery of drugs that can effectively treat disease and alleviate pain is one of the core challenges facing modern medicine. The tools and techniques of machine learning have perhaps the greatest potential to provide a fast and efficient route toward the fabrication of novel and effective drugs. In particular, modern structured kernel methods have been successfully applied to range of problem domains and have been recently adapted for graph structures making them directly applicable to pharmaceutical drug discovery. Specifically graph structures have a natural fit with molecular data, in that a graph consists of a set of nodes that represent atoms that are connected by bonds. In this thesis we use graph kernels that utilize three different graph representations: molecular, topological pharmacophore and reduced graphs. We introduce a set of novel graph kernels which are based on a measure of the number of finite walks within a graph. To calculate this measure we employ a dynamic programming framework which allows us to extend graph kernels so they can deal with non-tottering, softmatching and allows the inclusion of gaps. In addition we review several graph colouring methods and subsequently incorporate colour into our graph kernels models. These kernels are designed for molecule classification in general, although we show how they can be adapted to other areas in drug discovery. We conduct three sets of experiments and discuss how our augmented graph kernels are designed and adapted for these areas. First, we classify molecules based on their activity in comparison to a biological target. Second, we explore the related problem of lead hopping. Here one set of chemicals is used to predict another that is structurally dissimilar. We discuss the problems that arise due to the fact that some patterns are filtered from the dataset. By analyzing lead hopping we are able to go beyond the typical cross-validation approach and construct a dataset that more accurately reflect real-world tasks. Lastly, we explore methods of integrating information from multiple targets. We test our models as a multi-response problem and later introduce a new approach that employs Kernel Canonical Correlation Analysis (KCCA) to predict the best molecules for an unseen target. Overall, we show that graph kernels achieve good results in classification, lead hopping and multiple target experiments
Performance of Hybrid Direct-Sequence Time-Hopping Ultrawide Bandwidth Systems over Nakagami-m Fading Channels
No full textThis paper investigates and compares the performance of various ultrawide bandwidth (UWB) systems when communicating over Nakagami-m fading channels. Specifically, the direct-sequence (DS), time-hopping (TH) and hybrid direct-sequence time-hopping (DS-TH) UWB systems are considered. The performance of these UWB systems is studied associated with employing the conventional single-user correlation detector or minimum mean-square error (MMSE) multiuser detector. Our simulation results show that the hybrid DS-TH UWB system may outperform a corresponding pure TH-UWB or pure DS-UWB system in terms of the achievable error performance. Given the total spreading gain of the hybrid DS-TH UWB system, there is an optimal setting of the TH spreading factor and DS spreading factor, which results in the best error performance
Electrical and magnetic properties of n-Cd(_1-x)Mn(_x) Te close to the metal-insulator transition
No full textElectrical transport and magnetic measurements have been made on n-Cd(_1-x)Mn(_x) Te (0.047 50 mT) Efros-Shklovskii variable range hopping is observed in the insulating phase. These results are attributed to the formation of a hard gap in the density of states, having a magnetic origin. At higher fields an insulator-metal phase transition occurs. In the metallic phase the conductivity can be described by a quantum correction to the zero temperature conductivity due to the effect of electron-electron interactions. Results obtained before and after illumination are consistent with scaling theory of electron localisation, having a critical exponent close to unity, indicative of the importance of electron-electron interactions. A reduction in the value of the critical field is seen after increasing the carrier density (B(_c) = 2.0 and 1.3 T for n = 3.3 xl0(^17)cm(^-3) and 3.8 x10(^17) cm(^-3) respectively).At low temperatures an anisotropy in the resistivity has been measured for samples in the spin glass phase. Magnetoresistance measurements have shown results consistent with previous measurements, in addition to a large, low field component that is attributed to the effect of magnetic field on electrons in the variable range hopping regime
- …
