2,965 research outputs found
0
No full textHere is a curious book. Its title-page declares "The Artist's Book of Fables" but its pre-title-page has "Fables, Original and Selected, with a Memoir of the Author." After that title-page, it is identical with "Fables, Original and Selected" as in our copy printed by John Murray in 1833. There is again an AI at the front and an index of engravings and engravers at the back. I found that copy twenty years ago. I had found an inferior copy twenty-two years before that. At that time, I noted Aesopic fables here including "Stone Broth" and "The Mouse and the Oyster."This is a hardbound book (hard cover)James Northcote, R.A
Turbulent entrainment in a shearless mixing layer at the edge of a cloud
No full textThree-dimensional direct numerical simulations which combine the Eulerian description of temperature, vapor content and velocity with a Lagrangian ensemble of cloud water droplets are used to study the turbulent entrainment and subsequent mixing of clear air with a cloudy air filament. The study is conducted in a shearless mixing layer setup which is adjusted to realistic conditions at a cumulus cloud boundary. The magnitude of turbulent velocity fluctuations in- and outside the cloud can be varied independently. We find that the evolution of the cloud water droplet ensemble depends slightly only on the contrast of turbulent velocity fluctuations in- and outside the cloud filament. The buoyancy feedback on the flow via the evaporating droplets causes a transient amplification of all fluctuations before the turbulence eventually decays. We study the evolution of the probability density functions of droplet size as well as of supersaturation, temperature and vorticity at the droplet positions
Flyleaf of The Village Politicians, signed by author and publisher R.A. Parsons, and printed by Guardian Ltd.
No full textNewIntroduction. Flyleaf of the The Village Politicans by R.A. Parsons and printed by Guardian Ltd.DA vol. 15 no.
Non-Linear Time Series Analysis of Deep Groundwater Levels: An application to the Veluwe
No full textThe objective of this study is to improve the simulation of deep groundwater levels by time se- ries models with pre-defined impulse response functions. This is attempted by adding a conceptual non-linear root zone model to simulate the recharge series to the model and by testing the use of a separate response function for the percolation zone. Three root zone models are developed based on two different recharge mechanisms: preferential flow, percolation, and a combination of the two. The performance of these models is compared to a linear model that is commonly used in time se- ries models to simulate the recharge. The approach is applied to groundwater level measurements in the Veluwe, a largely forested area in the Netherlands characterized by thick unsaturated zones. The effect of groundwater extractions and land reclamations is added to the model to further im- prove the simulation of the groundwater levels. The models are tested on three observations wells with increasing thickness of the unsaturated zone, varying from 7 m to 29 m to 49 m. The results show that model performance is improved by the implementation of a non-linear root zone model, particularly in simulating the peaks and lows in the groundwater levels. The recharge fluxes simulated by the non-linear models show different patterns that are physically more realistic than those simulated by the linear model. It is shown that different recharge series result in simulated groundwater levels that are very similar. This is a clear example of equifinality and it is recommended to introduce new sources of information to validate the modelled processes (e.g., water content measurements of the percolation zone or actual evaporation data). For the shallow well, the models with a single response function are selected as the best. The largest improvements for the deeper groundwater levels are obtained by the addition of a separate response for the percolation zone. For example, the average deviation from the observed ground- water levels decreased 0.18 m to 0.08 m for the deepest observation well by applying the separate response function. The models with an additional response function were better at simulating the estimated time to peak, the time it takes a recharge pulse to cause a peak in the groundwater levels. The time to peak is introduced in this research as a qualitative indicator to validate the modelled processes. The simulated responses indicate that the groundwater levels respond very quickly to water that leaves the root zone, even though the percolation zone is tens of metres thick. For each of the observations wells it is investigated if adding the effect of groundwater extrac- tions or land reclamations of Flevoland to the models improves the simulation of the groundwater levels. For the shallow well it is concluded that either the effect of land reclamations or groundwater extractions needs to be taken into account. Since these two stresses are correlated, it is concluded that only one of these should be taken into account when no further information is available to con- strain the models. For the medium deep well, the additional stresses did not significantly improve model performance and it is concluded that they do not have to be taken into account for this well. For the deep well, model performance is improved by both stresses. The largest improvements are observed when the effect of groundwater extractions is considered in the model. For implemen- tation of these stresses, the entire simulation period should be used for calibration, or constraints have to be implemented to obtain realistic results.Water ResourcesWater ManagementCivil Engineering and Geoscience
Chemicals from renewable biomass: A renaissance in carbohydrate chemistry
No full textThe conversion of sugars, derived from waste polysaccharide biomass, to commodity chemicals by fermentation or catalytic hydrogenation, oxidation or dehydration or combinations thereof are reviewed.Accepted Author ManuscriptBT/Biocatalysi
Recommended from our members
Evaluation of plasma-sprayed CoS{sub 2} cathodes for thermal batteries
No full textConventional electroactive stack components in thermal batteries are constructed from pressed-powder parts. These include the anode, separator, and cathode pellets (discs). Pressing parts that are less than 0.010 inch thick is difficult. The use of plasma spray to deposit thin CoS{sub 2} cathode films onto a stainless steel substrate was examined as an alternative to pressed-powder cathodes. The plasma-sprayed electrodes were tested in single cells under isothermal conditions and constant-current discharge over a temperature range of 400 C to 550 C using standard LiSi anodes and separators based on the LiCl-KCl eutectic. Similar tests were conducted with cells built with conventional pressed-powder cathodes, which were tested under the same conditions for comparative purposes. This paper presents the results of those tests
Recommended from our members
A materials database for Li(Si)/FeS sub 2 thermal batteries
No full textThe establishment of a database for the materials that are used in production Li(Si)/FeS{sub 2} thermal batteries designed at Sandia National Laboratories is described. The database is a Hewlett-Packard (HP) network type (IMAGE) designed to run on an HP3000 computer. Heavy emphasis is placed on the use of screen forms for entry, editing, and retrieval of data. Custom screen forms were used for the various materials in the battery. For the purposes of the materials database, each battery is composed of four mixes: cathode, separator, anode, and heat (pyrotechnic) powders. A consistent lot-numbering system was adopted for both the mixes and the discrete components that make up the mixes. Each serial number of a particular battery is linked to the lot numbers of the four mixes used in the battery. Each mix, in turn, is linked to the lot numbers of the discrete components that are contained within the mix. This allows traceability of each of the components used in any given serial number of a particular battery. The materials database provides the necessary traceability, as required by the Department of Energy, for the lifetime of the program associated with the battery. 3 refs., 23 figs
Recommended from our members
Thermal batteries: A technology review and future directions
Get PDFThermally activated (``thermal``) batteries have been used for ordnance applications (e.g., proximity fuzes) since World War II and, subsequent to that, in nuclear weapons. This technology was developed by the Germans as a power source for their V2 rockets. It was obtained by the Allies by interrogation of captured German scientists after the war. The technology developed rapidly from the initial primitive systems used by the Germans to one based on Ca/CaCrO{sub 4}. This system was used very successfully into the late 1970s, when it was replaced by the Li-alloy/FeS{sub 2} electrochemical system. This paper describes the predominant electrochemical couples that have been used in thermal batteries over the years. Major emphasis is placed on the chemistry and electrochemistry of the Ca/CaCrO{sub 4} and Li-alloy/FeS{sub 2} systems. The reason for this is to give the reader a better appreciation for the advances in thermal-battery technology for which these two systems are directly responsible. Improvements to date in the current Li-alloy/FeS{sub 2} and related systems are discussed and areas for possible future research and development involving anodes, cathodes, electrolytes, and insulations are outlined. New areas where thermal-battery technology has potential applications are also examined
- …
