1,720,974 research outputs found
Bioactive polymeric scaffolds and nanoformulates in pain management and tissue engineering
No full textAdditive manufacturing of star poly(ε-caprolactone) wet-spun scaffolds for bone tissue engineering applications
Get PDFThree-dimensional fibrous scaffolds made of a three-arm star poly(ε-caprolactone) were developed by employing a novel computer-aided wet-spinning apparatus to precisely control the deposition pattern of an extruded polymeric solution as a filament into a coagulation bath. Star poly(ε-caprolactone)/hydroxyapatite composite scaffolds composed of fibres with a porous morphology both in the outer surface and in the cross section were successfully produced with a layer-by-layer approach achieving good reproducibility of the internal architecture and external shape. Changes in processing parameters were used to fabricate scaffolds with different architectural parameters in terms of average pore size in the xy-axes (from 190 to 297 μm) and in the z-axis (from 54 to 126 μm) and porosity (in the range of 20%–60%). Based on the mechanical characterization, processing variations and hydroxyapatite loading have an influence on scaffold compression properties. Cell cultures, using a murine pre-osteoblast cell line, had good cell responses in terms of proliferation and osteoblastic differentiation. Thus, this technique appears to be an effective method for producing customized polymeric scaffolds for bone tissue engineering applications
A new hydroxyapatite-based biocomposite for bone replacement
Get PDFSince the 1970s, various types of ceramic, glass and glass-ceramic materials have been proposed and used to replace damaged bone in many clinical applications. Among them, hydroxyapatite (HA) has been successfully employed thanks to its excellent biocompatibility. On the other hand, the bioactivity of HA and its reactivity with bone can be improved through the addition of proper amounts of bioactive glasses, thus obtaining HA-based composites. Unfortunately, high temperature treatments (1200 degrees C divided by 1300 degrees C) are usually required in order to sinter these systems, causing the bioactive glass to crystallize into a glass-ceramic and hence inhibiting the bioactivity of the resulting composite. In the present study novel HA-based composites are realized and discussed. The samples can be sintered at a relatively low temperature (800 degrees C), thanks to the employment of a new glass (BG_Ca) with a reduced tendency to crystallize compared to the widely used 45S5 Bioglass (R). The rich glassy phase, which can be preserved during the thermal treatment, has excellent effects in terms of in vitro bioactivity; moreover, compared to composites based on 45S5 Bioglass (R) having the same HA/glass proportions, the samples based on BG_Ca displayed an earlier response in terms of cell proliferatio
Bioerodible polymeric nanoconstructs for the administration of hydrophobic bioactive agents in tissue engineering
No full textA Novel Method for the Preparation of Retinoic Acid-Loaded Nanoparticles
No full texthe goal of present work was to investigate the use of bioerodible polymeric nanoparticles as carriers of retinoic acid (RA), which is known to induce differentiation of several cell lines into neurons. A novel method, named "Colloidal-Coating", has been developed for the preparation of nanoparticles based on a copolymer of maleic anhydride and butyl vinyl ether (VAM41) loaded with RA. Nanoparticles with an average diameter size of 70 nm and good morphology were prepared. The activity of the encapsulated RA was evaluated on SK-N-SH human neuroblastoma cells, which are known to undergo inhibition of proliferation and neuronal differentiation upon treatment with RA. The activity of RA was not affected by the encapsulation and purification processes
Processing and characterization of innovative scaffolds for bone tissue engineering
No full textA new protocol, based on a modified replication method, is proposed to obtain bioactive glass scaffolds. The main feature of these samples, named "shell scaffolds", is their external surface that, like a compact and porous shell, provides both high permeability to fluids and mechanical support. In this work, two different scaffolds were prepared using the following slurry components: 59 % water, 29 % 45S5 Bioglass(A (R)) and 12 % polyvinylic binder and 51 % water, 34 % 45S5 Bioglass(A (R)), 10 % polyvinylic binder and 5 % polyethylene. All the proposed samples were characterized by a widespread microporosity and an interconnected macroporosity, with a total porosity of 80 % vol. After immersion in a simulated body fluid (SBF), the scaffolds showed strong ability to develop hydroxyapatite, enhanced by the high specific surface of the porous systems. Moreover preliminary biological evaluations suggested a promising role of the shell scaffolds for applications in bone tissue regeneration. As regards the mechanical behaviour, the shell scaffolds could be easily handled without damages, due to their resistant external surface. More specifically, they possessed suitable mechanical properties for bone regeneration, as proved by compression tests performed before and after immersion in SBF
Additive manufacturing of wet-spun polymeric scaffolds for bone tissue engineering
No full textAn Additive Manufacturing technique for the fabrication of three-dimensional polymeric scaffolds, based on wet-spinning of poly(epsilon-caprolactone) (PCL) or PCL/hydroxyapatite (HA) solutions, was developed. The processing conditions to fabricate scaffolds with a layer-by-layer approach were optimized by studying their influence on fibres morphology and alignment. Two different scaffold architectures were designed and fabricated by tuning inter-fibre distance and fibres staggering. The developed scaffolds showed good reproducibility of the internal architecture characterized by highly porous, aligned fibres with an average diameter in the range 200-250 mu m. Mechanical characterization showed that the architecture and HA loading influenced the scaffold compressive modulus and strength. Cell culture experiments employing MC3T3-E1 preosteoblast cell line showed good cell adhesion, proliferation, alkaline phosphatase activity and bone mineralization on the developed scaffolds
Melt electrospinning writing of three-dimensional star poly(??-caprolactone) scaffolds
No full textIn the last decade, the melt-electrospinning technique has gained attention for the production of highly porous microfibrous tissue engineering scaffolds. The possibility of processing polymers without the use of organic solvents is one of the main advantages over solution electrospinning. In this study, computer-controlled melt-electrospinning of a commercial poly(??-caprolactone) and of two batches with different molecular weights of a three-arm star poly(??-caprolactone) by means of a screw-extruder-based additive manufacturing system is reported. Experimental parameters such as processing temperature, extrusion flow rate and applied voltage were studied and optimized in order to obtain non-woven meshes with uniform fibre morphology. Applying the optimized parameters, three-dimensional scaffolds were produced using a layer-by-layer approach (0?????????90?? lay-down pattern). ?? 2013 Society of Chemical Industr
Preparation, physical-chemical and biological characterization of chitosan nanoparticles loaded with lysozyme
No full textA commercially available chitosan (CS) was employed in the formulation of nanoparticles loaded with lysozyme (LZ) as antimicrobial protein drug model. Due to the variability of commercially available batches of chitosans and to the strict dependence of their physical and biological properties to the molecular weight (Mw) and deacetylation degree (DD) of the material, the CS was fully characterized resulting in weight-average molecular weight of 108,120 g/mol and DD of 92%. LZ-loaded nanoparticles (LZ-NPs) of 150 nm diameter were prepared by inotropic gelation. The nanoparticles were effectively preserving the antibacterial activity of the loaded enzyme, which was slowly released over 3 weeks in vitro and remained active toward Staphylococcus epidermidis up to 5 days of incubation. Beyond the intrinsic antibacterial activity of CS and LZ, the LZ-NPs evidenced a sustained antibacterial activity that resulted in about 2 log reduction of the number of viable S. epidermidis compared to plain CS nanoparticles. Furthermore, the LZ-NPs showed a full in vitro cytocompatibility toward murine fibroblasts and, in addition to the potential antimicrobial applications of the developed system, the proposed study could serve as an optimal model for development of CS nanoparticles carrying antimicrobial peptides for biomedical applications
Fibrous star poly(ε-caprolactone) melt-electrospun scaffolds for wound healing applications
No full textPolymeric fibrous scaffolds based on the biocompatible and biodegradable three-arm-branched star poly(ε-caprolactone) (Mw = 189,000 g/mol) were prepared by a melt electrospinning technique. The possibility of processing polymers without the use of organic solvents is one of the main advantages over solution electrospinning. Scaffolds were biologically tested for their ability of supporting skin tissue regeneration. For this purpose, mouse embryo fibroblast (BALB/3T3 clone A31) and human keratinocyte (HaCaT) cell lines were selected as models, and seeded onto the polymeric supports both as single and co-culture. Cell viability, proliferation, and collagen production were assessed by WST-1 assay and Direct Red 80 dye, respectively. Cell morphology and colonization of the supports were evaluated by scanning electron microscopy and confocal laser scanning microscopy. Results highlighted that the star poly(ε-caprolactone) scaffolds were able to promote collagen production by fibroblasts. In co-culture studies, scaffolds supported adhesion, proliferation, and spatial organization of both cell lines. By virtue of the observed results, the developed polymeric scaffolds appeared suitable as biodegradable and biocompatible three-dimensional supports for skin tissue regeneration in wound healing dressing
- …
