176,998 research outputs found
Simulation of thermal plant optimization and hydraulic aspects of thermal distribution loops for large campuses
No full textFollowing an introduction, the author describes Texas A&M University and its utilities system. After that, the author presents how to construct simulation models for chilled water and heating hot water distribution systems. The simulation model was used in a $2.3 million Ross Street chilled water pipe replacement project at Texas A&M University. A second project conducted at the University of Texas at San Antonio was used as an example to demonstrate how to identify and design an optimal distribution system by using a simulation model. The author found that the minor losses of these closed loop thermal distribution systems are significantly higher than potable water distribution systems. In the second part of the report, the author presents the latest development of software called the Plant Optimization Program, which can simulate cogeneration plant operation, estimate its operation cost and provide optimized operation suggestions. The author also developed detailed simulation models for a gas turbine and heat recovery steam generator and identified significant potential savings. Finally, the author also used a steam turbine as an example to present a multi-regression method on constructing simulation models by using basic statistics and optimization algorithms. This report presents a survey of the author??s working experience at the Energy Systems Laboratory (ESL) at Texas A&M University during the period of January 2002 through March 2004. The purpose of the above work was to allow the author to become familiar with the practice of engineering. The result is that the author knows how to complete a project from start to finish and understands how both technical and nontechnical aspects of a project need to be considered in order to ensure a quality deliverable and bring a project to successful completion. This report concludes that the objectives of the internship were successfully accomplished and that the requirements for the degree of Degree of Engineering have been satisfied
Intern experience at CH���M Hill, Inc.: an internship report
No full textIncludes author's vita"Submitted to the College of Engineering of Texas A&M University in partial
fulfillment of the requirement for the degree of Doctor of Engineering."Includes bibliographical referencesA review of the author's internship experience with CH���M HILL, Inc.
during the period September 1975 through May 1976 is presented. During this nine month
internship the author worked as an Engineer II in the Industrial Processes discipline of this
large consulting engineering firm... The author's prime responsibility was as one of three
lead design engineers on the design of a large wastewater treatment facility for a pulp mill
in Hoquiam, Washington owned by ITT Rayonier Inc. The work generally consisted of the design
of individual treatment units and associated piping and pumping. The purpose of the project
was to provide wastewater treatment capabilities that would satisfy the effluent limitations
(standards) imposed upon the mill by the State of Washington Department of Ecology and the
U.S. Environmental Protection Agency. The author's assignment also entailed necessary
interaction with the project manager and other CH���M HILL design engineers and support staff
members, the client's representatives, and representatives of two other consulting engineering
firms working on the project. Thus, the internship position at CH���M HILL provided considerable
experience coordinating the author's work with the work of other engineers, guiding the design
and administrative efforts of a support staff, and interacting regularly with the client and
other consulting firms. This broad exposure to a variety of engineering and organizational
problems provided a valuable educational experience
Experimental investigations into a hybrid energy storage system using directly connected lead-acid and Li-ion batteries
No full textThis paper presents experimental investigations into a hybrid energy storage system comprising directly parallel connected lead-acid and lithium batteries. This is achieved by the charge and discharge cycling of five hybrid battery configurations at rates of 0.2–1C, with a 10–50% depth of discharge (DoD) at 24 V and one at 48 V. The resulting data include the overall round-trip efficiency, transient currents, energy transfers between the strings, and the amount of energy discharged by each string across all systems. The general observation is that the round-trip efficiency drops from a maximum of around 94–95% in the first stages of the charge/discharge process, when only the Li-ion strings are active, to around 82–90% when the lead-acid strings reach a DoD of up to 50%. The most important parameters in the round-trip efficiency function are the ratio between the Li-ion and lead-acid energy available and the charge/discharge current. The energy transfer between the strings, caused by the transient currents,
Smartness of Learning Ecosystems and its bottom-up emergence in six European Campuses
No full textEach year a considerable amount of money is spent on the productionof several national and international University rankings that may deeplyinfluence the students’ enrollment. However, all such rankings are based almostexclusively on numerical indicators weakly related to the quality of the learningprocess and do not consider the perceptions of the “end users”: the learners.Recently, as part of the activity promoted by the Observatory on the Smart CityLearning, we have produced an alternative approach to benchmark the learningecosystems based on the satisfaction of the needs described by the Maslow’sPyramid and on the achievement of the state of “flow” by the actors involved inthe learning processes. Here we report on the first validation of such abenchmarking approach that has been tested in six European Campusesinvolving more than 800 students. The critical analysis of the outcomes allowedus, among other results, to identify the set of the most relevant indicators out ofthose that were initially proposed and the identification of a “smartness” axis onthe plan of the first two principal components derived from a PrincipalComponent Analysis (PCA) applied to the collected data
The Year of Living Dangerously
No full textWe consider the issue N. 46 particularly significant because it comes at the end of 2020, a year that marked the recent history of humanity. On one side, the pandemic reminded us how fragile mankind is and that it can succumb to a small and invisible enemy; on the other side, the Covid-19 challenged and stimulated the potential of our intelligence and creativity that, when driven by collaboration and solidarity, can be very high. The effects of the pandemic inevitably put under stress all learning ecosystems of the world that had to switch suddenly to the on-line modality and remained confined to this virtual dimension for a long time. It was a leap into the shadow, if not into darkness, the consequences of which are still to be fully understood; at present they are still, and will remain for a long time, under investigation
Application of Particle Swarm Optimization to Formative E-Assessment in Project Management
No full textThe current paper describes the application of Particle Swarm Optimization algorithm to the formative e-assessment problem in project management. The proposed approach resolves the issue of personalization, by taking into account, when selecting the item tests in an e-assessment, the following elements: the ability level of the user, the targeted difficulty of the test and the learning objectives, represented by project management concepts which have to be checked. The e-assessment tool in which the Particle Swarm Optimization algorithm is integrated is also presented. Experimental results and comparison with other algorithms used in item tests selection prove the suitability of the proposed approach to the formative e-assessment domain. The study is presented in the framework of other evolutionary and genetic algorithms applied in e-education.Particle Swarm Optimization, Genetic Algorithms, Evolutionary Algorithms, Formative E-assessment, E-education
Smart City Analytics: state of the art and future perspectives
No full textIn accordance with a 'people centred' vision, this paper critically examines current approaches to smart cities benchmarking. In particular, by means of correlation analysis and Principal Component Analysis (PCA) we put in evidence present limitations of city rankings and, as well, the emergence of different perspectives for data interpretations. To follow, a possible redesign of the 'Smart Cities Analytics' grounded on the traces left by individuals, is suggested. In particular, as an example, we focus on the potentiality offered by automatic text analysis to extract people perceptions and expectations that, in turns, demonstrate the need to integrate bottom-up and top-down approaches to city benchmarking. Finally a novel definition of smart city based on the territorial state of flow is proposed and, as a consequence, a novel path toward smart city benchmarking suggested
Intern experience at the Texas Transportation Institute: an internship report
No full text"Submitted to the College of Engineering of Texas A&M University in partial
fulfillment of the requirements for the degree of Doctor of Engineering."Includes vita (leaf 91)Includes bibliographical references (leaf 57)This report discusses the author's engineering experience at the Texas
Transportation Institute (TTI), Texas A&M University from March 1974 through July 1977. A
report of this experience plus twelve additional hours of academic course work were
substituted for an internship according to requirements established by the College of
Engineering. Although the author could not retroactively establish objectives of the type
associated with a typical internship, the work experience gained could be related to the two
general objectives of an intership: 1. To demonstrate an identifiable contribution to the
organization in which the intern served, and 2. To enable the intern to become aware of the
non-technical aspects of working as an engineer in a non-academic environment. While a member
of the Texas Transportation Institute staff, the author worked on a number of projects in the
areas of highway traffic engineering research and the preparation of continuing education
courses for transportation engineering officials. These assignments were contained within the
Urban Transportation Systems Division of TTI. This report delineates the author's contribution
to four particular projects and discusses the technical as well as non-technical experience
gained from each. Having been exposed to more engineering situations than many of the other
Doctor of Engineering students, the author has already formulated some rather specific
milestones for the future. The Doctor of Engineering program is discussed in conjunction with
its potential for helping the author attain these career goals and objectives. Also, some
thoughts are presented regarding the Doctor of Engineering as a viable alternative to the
Ph.D. in preparing for a career in engineering higher education
The long-wavelength view of GG Tau A: rocks in the ring world
No full textWe present the first detection of GG Tau A at centimetre wavelengths, made with the Arcminute Microkelvin Imager Large Array at a frequency of 16 GHz (λ = 1.8 cm). The source is detected at >6 σrms with an integrated flux density of S16GHz = 249 ± 45 µJy. We use these new centimetre-wave data, in conjunction with additional measurements compiled from the literature, to investigate the long-wavelength tail of the dust emission from this unusual protoplanetary system. We use an MCMC-based method to determine maximum likelihood parameters for a simple parametric spectral model and consider the opacity and mass of the dust contributing to the microwave emission. We derive a dust mass of Md ~ 0.1 Msun, constrain the dimensions of the emitting region and find that the opacity index at λ > 7 mm is less than unity, implying a contribution to the dust population from grains exceeding ~4 cm in size. We suggest that this indicates coagulation within the GG Tau A system has proceeded to the point where dust grains have grown to the size of small rocks with dimensions of a few centimetres. Considering the relatively young age of the GG Tau association in combination with the low derived disc mass, we suggest that this system may provide a useful test case for rapid core accretion planet formation models
- …
