1,721,147 research outputs found
Photo-renewable engineered sensor based on silica, silver nanoparticles and titania
No full textElectrode surface passivation and fouling are important challenges in electroanalysis when using modified electrodes in complex matrices, especially in the biomedical and environmental fields [1-2].
In order to overcome such problems, the production of highly engineered ad hoc designed devices could provide really effective sensors [2]. In particular, a reliable and reusable sensor, that could be cleaned by a simple irradiation with UV or solar light, could be perfect for this purpose.
In this context, a three-layered transparent electrode, in which silver nanoparticles are embedded between a bottom silica and a top titania layer is developed [3-4]. Such structure confers to the device multifunctional properties which can be conveniently used in the detection and quantification of some neurotransmitters: dopamine, norepinephrine and serotonin.
The sensor is thoroughly investigated by structural, morphological and electrochemical characterizations in order to understand the role of each component with the aim to improve the robustness and efficiency of the electroanalytical system. In particular, the size distribution of silver nanoparticles, the device architecture and surface homogeneity are inspected by electron microscopy. As confirmed by X-ray diffraction the overlayer is made of anatase (the active polymorph of titanium dioxide), capable of photodegrading model contaminants. Furthermore, electrochemical techniques (cyclic voltammetry and electrochemical impedance spectroscopy) revealed that a highly ordered distribution of silver nanoparticles constitutes the active analytical core of the device, allowing easier electron transfer and better quantification of the analytes.
The system presents good sensing performances, reaching low detection limits even in the presence of typical interferents such as ascorbic and uric acids. Moreover, the titania photoactive top layer allows the complete recovery of the device performance in terms of sensitivity after a fast and simple UV-A cleaning step, affordable with different UV sources. In particular, three lamps (different in terms of power and wavelength) were tested, reaching the total removal of the contaminants in 10-15 minutes [5]. This “self-cleaning” property, combined with a remarkable resistance against aging and ease of use, allows to employ the sensor also for detection in real matrixes, such as liquor and serum.
ACKNOWLEDGEMENTS
The Authors would like to thank MIUR (Ministero dell’Istruzione, dell’Università e della Ricerca) for the fundings in the framework of the PRIN 2012 Project (20128ZZS2H)
REFERENCES
[1] C.M.A. Brett, Pure Appl. Chem. 73, 2001, pp 1969–1977.
[2] C.M. Welch, R.G. Compton, Anal. Bioanal. Chem. 384, 2006, pp 601–619.
[3] G. Maino, D. Meroni, V. Pifferi, L. Falciola, G. Soliveri, G. Cappelletti, S. Ardizzone, J. Nanoparticle Res. 15, 2013, pp 2087.
[4] G. Soliveri, V. Pifferi, G. Panzarasa, S. Ardizzone, G. Cappelletti, D. Meroni, K. Sparnacci, L. Falciola, Analyst 140, 2015, 1486-1494.
[5] V. Pifferi, G. Soliveri, G. Panzarasa, S. Ardizzone, G. Cappelletti, D. Meroni, L. Falciola, RSC Advances, 5, 2015, 71210-71214
Self-cleaning properties of a silica/silver nanoparticles/titania sandwich sensor
No full textOne of the main challenges faced during electroanalysis of complex matrices is represented by fouling and passivation of the electrode surface, especially in the fields of biomedical and environmental trace analysis [1], where sophisticated and highly engineered sensors have to be used in order to increase sensitivity and lower detection limits. These sensors can not be cleaned by conventional mechanical or electrochemical procedures, since these methods could affect the integrity of the active layer. In order to overcome these problems, the production of highly engineered reliable and reusable devices, designed ad hoc for specific applications, which could be simply cleaned by irradiation with UV light, would be an interesting step beyond the current state of the art.
In this context, a three-layered transparent electrode, in which silver nanoparticles are embedded between a bottom silica and a top titania layer [2, 3] was designed, prepared and characterized. The device structure is meant to confer multifunctional properties for a complex biomedical challenge: the detection and quantification of catecholamine neurotransmitters. The key role of each component of the device was thoroughly investigated to demonstrate the robustness and efficiency of the final sensor. In particular, the size distribution of silver nanoparticles, the device architecture and surface homogeneity were inspected by electron microscopy. The cleaning overlayer was made of the active polymorph of titanium dioxide (anatase), as confirmed by X-ray diffraction and by model contaminants photodegradation measurements. Electrochemical techniques (cyclic voltammetry and electrochemical impedance spectroscopy) revealed that an highly ordered distribution of silver nanoparticles is the active core of the device, allowing easier electron transfer and better quantification of the analytes even in the presence of conventional interferents, e.g. ascorbic acid and uric acid in human fluids.
The high photoactivity of titania top layer allowed total recovery of the device performance in terms of sensitivity after a fast (less than 20 min) UV cleaning step, affordable with different UV-A sources. This self-cleaning property, combined with a remarkable resistance against ageing, allows to employ the sensor also in on-field and remote applications.
References
[1] C. M. Welch and R. G. Compton, Anal. Bioanal. Chem. 2006, 384, 601–619.
[2] G. Maino, D. Meroni, V. Pifferi, L. Falciola, G. Soliveri, G. Cappelletti, S. Ardizzone, J. Nanoparticle Res. 2013, 15, 2087.
[3] G. Soliveri, V. Pifferi, G. Panzarasa, S. Ardizzone, G. Cappelletti, D. Meroni, K. Sparnacci, L. Falciola, Analyst 2015, 140, 1486
Energia solare per il disinquinamento dell’aria e dell’acqua
No full textLe città soffrono di notevoli problematiche di inquinamento dell’aria e delle acque, dovuti alle emissioni domestiche, veicolari e industriali. In Lombardia si stima che il solo inquinamento atmosferico riduca l’aspettativa di vita di ben 14 mesi.1 Inoltre, i più recenti dati sul’inquinamento delle acque superficiali e di falda in Pianura Padana parlano di un preoccupante aumento di contaminanti tossici e bioaccumulabili, come i pesticidi.2 Per affrontare la complessa tematica dell’inquinamento atmosferico, i ricercatori stanno studiando tecniche innovative atte all’eliminazione degli inquinanti, in particolare quelli non biodegradabili e tossici. Tra le varie tecniche allo studio, la fotocatalisi si distingue per la sua versatilità, che le consente di essere applicata all’inquinamento sia dell’aria sia dell’acqua. Questa tecnica è basata sull’impiego di particolari materiali, detti fotocatalizzatori, che utilizzano la luce per attivare la degradazione di inquinanti non biodegradabili a sostanze innocue, senza l’utilizzo di altri reagenti e/o fonti di energia. Questa tecnica green è molto adatta all’applicazione in ambito urbano, dato che i fotocatalizzatori possono essere integrati nei materiali da costruzione, quali vetri e/o cementi attivi, come ad esempio nel Padiglione Italia ad EXPO 2015. Nonostante esistano già allo stato attuale diversi prodotti commerciali basati su questa tecnologia, diverse problematiche rimangono da risolvere, quali ad esempio il miglioramento dell’efficienza dei materiali sotto irraggiamento di luce solare e l’integrazione in vernici attive e stabili nel tempo.
Verranno illustrate le principali fonti di inquinamento urbano, con esempi tratti dalla realtà milanese, e verrà presentata una panoramica della ricerca nel campo delle tecniche di disinquinamento, in particolare quelle basate sulla fotocatalisi, con esempi di applicazioni pratiche in diverse aree
Nanostructured semiconductor films: synthesis, surface functionalization and innovative applications
No full textEnvironmental pollution is one of the great challenges of the 21st century. The WHO has recently estimated that air pollution causes 600,000 premature deaths each year in Europe. Another major health concern is water pollution by compounds that resist biodegradation and conventional purification processes. Photocatalytic degradation of pollutants is an emerging technology in environmental protection, that has been successfully applied to the degradation of numerous organic and inorganic pollutants, both in gas-phase and in solution. With respect to conventional purification processes, photocatalysis by nanostructured semiconductors can lead to the complete degradation of highly recalcitrant pollutants to harmless substances using only light to activate the process. Some photocatalytic concretes and paintings that degrade pollutants are already on the market, but many problems remain to be overcome to obtain commercially successful products.
The ultimate aim of research in this field is using solar light as an environmental-friendly and inexpensive light source to activate photocatalysis. However, the most stable and active photocatalysts are activated only by UV light, which accounts for only about 5% of the solar spectrum. During her PhD, Daniela Meroni synthesized oxide-based photocatalysts active under visible light by doping with nonmetal ions. By an innovative combined approach involving both advanced characterization techniques and ab initio calculations, she clarified the dopant position within the semiconductor lattice and its influence on the electronic structure and photoactivity of the photocatalyst. These materials were successfully tested for the degradation of gas-phase pollutants, such as volatile organic compounds (VOCs), under solar light.
She also increased the efficiency of these materials by tailoring their synthetic pathway using soft templates and mixed oxides, and improved their durability by combining the photocatalytic approach with other advanced oxidation processes. In this way, she was able to obtain for the first time the complete degradation of an important recalcitrant endocrine-disrupting pollutant (cumylphenol), shedding light on its degradation mechanism.
With the aim of integrating nanostructured oxides in more complex devices, D.M. investigated their functionalization with alkylsilanes. In this way, she was able to tune their surface properties, such as surface energy, wetting and adhesion. The resulting materials were used to obtain self-cleaning films showing both superhydrophobic and superoleophobic properties. Furthermore, she exploited the oxide photocatalytic activity to create superhydrophobic/superhydrophilic patterns by irradiation with UV light through a photomask. The obtained wetting pattern was used to promote the site specific adsorption of molecules and nanoparticles. She also investigated another patterning technique, probe-based electrooxidative lithography, developing the first application of this patterning technique with nanometer-scale resolution to substrates other than silicon wafer. These studies laid the foundations for the integration of nanostructured oxides in complex devices, such as self-cleaning sensors for environmental monitoring
Self-cleaning features of an innovative engineered sensor based on silica, silver nanoparticles and titania
No full textPassivation of the electrode surface and fouling are important challenges in electroanalysis during the use of modified electrodes in complex matrices, especially in the biomedical and environmental fields [1-2].
In order to overcome such problems, the production of highly engineered ad hoc designed devices could access really effective sensors [2]. In particular, a performing, reliable and reusable sensor, that could be cleaned by a simple irradiation with UV or solar light, would be perfect for this purpose.
In this context, a three-layered transparent electrode, in which silver nanoparticles are embedded between a bottom silica and a top titania layer was developed [3-4]. Such structure confers to the device multifunctional properties for a complex biomedical challenge: the detection and quantification of catecholamine neurotransmitters. The sensor was thoroughly investigated by structural, morphological and electrochemical characterizations in order to understand the role of each component with the aim to improve the robustness and efficiency of the electroanalytical system.
The overlayer was made of anatase (the active polymorph of titanium dioxide) as confirmed by X-ray diffraction and by measuring the photodegradation of model contaminants. The size distribution of silver nanoparticles, the device architecture and surface homogeneity were inspected by electron microscopy. Electrochemical techniques (cyclic voltammetry and electrochemical impedance spectroscopy) revealed that a highly ordered distribution of silver nanoparticles constitutes the active core of the device, allowing easier electron transfer and better quantification of the analytes even in the presence of conventional interferents, e.g. ascorbic and uric acid. Titania photoactive top layer allowed total recovery of the device performance in terms of sensitivity after a fast and simple UV-A cleaning step, affordable with different UV sources. This self-cleaning property, combined with a remarkable resistance against aging and ease of use, allows to employ the sensor also in on-field and remote applications.
References
1. C.M.A. Brett, Pure Appl. Chem. 73, 2001, pp 1969–1977.
2. C.M. Welch, R.G. Compton, Anal. Bioanal. Chem. 384, 2006, pp 601–619.
3. G. Maino, D. Meroni, V. Pifferi, L. Falciola, G. Soliveri, G. Cappelletti, S. Ardizzone, J. Nanoparticle Res. 15, 2013, pp 2087.
4. G. Soliveri, V. Pifferi, G. Panzarasa, S. Ardizzone, G. Cappelletti, D. Meroni, K. Sparnacci, L. Falciola, Analyst 140, 2015, 1486-1494
Materiali con bagnabilità controllata : un’ispirazione dalla natura
No full textLo studio della “bagnabilità” di superfici solide da parte di liquidi è un campo affascinante e in continua evoluzione. In funzione della natura delle interazioni che si verificano al contatto solido/liquido, il liquido potrà ricoprire tutta la superficie con un film sottile (come nel caso di acqua su una superficie idrofila) o rimanere raccolto in gocce (come ad esempio per le gocce di acqua su una superficie polimerica). Nel primo caso prevalgono le forze adesive, nel secondo caso quelle coesive. I materiali di origine naturale mostrano caratteristiche di bagnabilità controllate ed, in alcuni casi, estreme: ad esempio, alcuni tipi di foglie e insetti sono superidrorepellenti. Traendo spunto da ciò che la natura crea in modo esemplare, questi effetti possono essere riprodotti sperimentalmente in laboratorio, al fine di modulare le caratteristiche di bagnabilità in funzione dello specifico interesse applicativo. I risvolti applicativi di questi aspetti sono numerosissimi e vanno dai biomateriali ai tessuti antimacchia, da sistemi antiappannamento a sistemi per la protezione del patrimonio culturale.The wettability of solid surfaces is the result of the balance between adhesive and cohesive forces. When adhesive forces at the solid/liquid interface prevail over the cohesive forces in the liquid, the drops will spread over the solid leading to a good wetting as in the case of water over an hydrophilic surface. When instead the adhesive forces are weak, the liquid will not wet the surface remaining in droplets, as water on a polymer. Natural materials exhibit tailored wetting behavior: for instance, certain leaves and insects present superhydrophobic properties. By mimicking what nature creates in an exemplary way, the wetting properties of systems can be tailored experimentally to obtain materials with great applicative impact. The possible applications of such phenomena are very numerous and span from biomaterials to antistain materials, from antifog surfaces to systems for the protection of cultural heritage
NANOSTRUCTURED SEMICONDUCTOR FILMS: SYNTHESIS, SURFACE FUNCTIONALIZATION AND INNOVATIVE APPLICATIONS
Full text linkIn recent years, photoactive semiconductors have received ever growing interest, as testified by the remarkable number of related publications, thanks to their promising applications in manifold fields such as environmental remediation and photovoltaics. Among the photoactive semiconductors, titanium dioxide has been by far the most investigated owing to its cheapness, non-toxicity and stability to photocorrosion. Titanium dioxide can be successfully applied to the photocatalytic remediation of air and water pollutants, H2 production from water splitting, and in solar light harvesting using second generation solar cells; it is a biocompatible material, and it can be employed to obtain self-cleaning surfaces. Although a few commercial applications employing nanometric TiO2 are already on the market, many issues still remain to be addressed to obtain efficient, reliable and durable materials. The present thesis work focuses onto the synthesis and the study of the physicochemical properties of nanometric TiO2. My research activity has focused on two main subjects, one more applicative and the other more fundamental.
The first part was devoted to the photocatalytic applications of TiO2. Photocatalytic oxidation of pollutants is one of the most promising technologies in environmental protection and remediation, especially for the removal of low concentration pollutants in slightly contaminated enclosed atmospheres. Nanometric titania has been successfully applied to the photo-oxidation/reduction of numerous organic and inorganic pollutants, both in gaseous phase and in solution. Several concretes and paintings containing nanometric titania that photo-oxidize pollutants are already on the market, but many disadvantages remain to be overcome in order to obtain commercially successful products. Hence, the first part of my research was directed towards the improvement of the photocatalytic activity of TiO2 to obtain more efficient photocatalysts for the degradation of environmental pollutants. The photocatalytic activity of titania is strongly affected by its particles’ physicochemical features, which, in their turn, are imposed by the synthetic path adopted for the material preparation. Therefore, it is essential to tailor the physicochemical characteristics of titania particles using an appropriate synthetic procedure in order to obtain highly active samples. A considerable part of my PhD project was devoted to the optimization of several synthetic procedures in order to produce TiO2 powders and films with tailored optical, morphological and electronic features.
One of the main disadvantages of TiO2 is its large band gap (3.2 eV for anatase, 3.0 eV for rutile), which corresponds to a light absorption in the UV region. Thus, currently TiO2 based materials require UV irradiation in order to activate the photocatalytic process. As only 5% of solar light is in the UV region, a shift towards visible absorption is required to improve the photocatalytic activity of TiO2 under solar irradiation. The introduction of non-metal ions in the TiO2 lattice represents one of the most promising approaches to induce a bathochromic shift, i.e., a shift of the absorption edge of TiO2 to longer wavelengths, and consequently increase the photocatalytic response of doped samples into the visible region. Therefore, during my thesis, I synthesized several doped samples with non-metals such as N, in order to assess if a bathochromic shift effectively leads to a higher photocatalytic activity in the visible region and, more important, under solar irradiation. N-doped TiO2 samples were obtained from different titania precursors (Ti(Oi-Pr)4, TiCl3) and adopting different N-sources (ammonia, triethylamine, tea). All obtained samples were exhaustively characterized, in order to obtain a complete picture of the modifications induced in the titania structure and surface features by the modifications of the synthetic pathway. Samples were characterized from the structural, morphological, electrochemical, optical and compositional point of view. Moreover, other features, such as magnetic properties, were determined and ab initio calculations of the electronic properties of the doped samples were performed. All N-doped samples showed a broad absorption in the visible region which was traced back, on the grounds of first principles calculations, to the formation of localized intragap electronic levels. Sample thin films were tested for their photocatalytic activity, under UV, visible and simulated solar irradiation, towards the degradation of gas phase ethanol and acetaldehyde. The most active N-doped sample, both under UV and solar irradiation, was the oxide showing the largest amount of paramagnetic N_b^• species. Under visible irradiation instead, the sample with the largest activity was the one showing the narrowest apparent band gap and the concomitant presence of anatase and brookite polymorphs, which might hinder charge recombination processes.
The structure of N-doped samples was elucidated not only by ordinary powder diffraction, but also by means of synchrotron radiation, using Extended X-ray Absorption Fine Structure (EXAFS) to understand the position of dopant ions inside the TiO2 crystal lattice. These data were obtained during a short research stay at the European Synchrotron Radiation Facility (ESRF) in Grenoble. Average Ti nearest neighbors distances were obtained from EXAFS experiments and compared with Density Functional Theory (DFT) calculations, showing that N substitutes oxygen at low levels of doping, whereas oxygen vacancy creation is observed at higher dopant concentrations.
Another strategy to improve the photocatalytic activity of TiO2 involves the enhancement of the adsorption and diffusion of pollutants into TiO2. In this respect, I investigated the effect of the modification of TiO2 morphology to obtain mesoporosity via different template syntheses. Mesoporous materials have been consistently proposed to produce better performing catalysts in many fields of catalysis. Here, the morphologic features of titania particles were tailored by using soft templates, in order to obtain materials with a high degree of porosity in the mesoporosity range. Two classes of soft templates were investigated: alkylpyridinium surfactants and block copolymers of the Pluronic family. As for the first class, both monomeric (dodecylpyridinium chloride, DPC) and dimeric gemini-like surfactants (gemini spacer 3, GS3) were employed. Mesoporous TiO2 samples were synthesized by a classical sol-gel route followed by an hydrothermal growth in the presence of one of the structure directed agents. The surfactant/oxide interactions at the solid/liquid interface were evaluated by adsorption isotherms, showing marked differences between the two surfactants. While DPC exhibited weak adsorbate/adsorbent interactions and weak self-aggregation tendency, resulting in the formation of very small, globular micelles, GS3 instead showed strong interactions with the TiO2 surface and the formation of elongated rods and further hexagonal arrangements could be proposed. Such different behaviors lead to significant diversities in the porous structure of the TiO2 samples. The small pores generated by the DPC micelle tend to collapse because of the heat of combustion generated during the surfactant removal step at 600 °C. On the contrary, GS3 leads to a significant fraction of pores in the mesoporosity range.
However, the use of cationic surfactants has an intrinsic limitation: high calcination temperatures are required to remove entirely the template. Such harsh conditions markedly reduce the surface area of the oxide due to particle sintering and crystal growth. Non-ionic structure directing agents, such as amphiphilic block copolymers, can be instead completely removed at much lower temperatures. Three block copolymers of the Pluronic family, characterized by different micelle size in water as determined by light scattering analysis, were employed to induce mesoporosity in nano-TiO2. The surfactants were removed by combining UV and thermal treatments in order to avoid pore collapse while obtaining a good oxide crystallinity. Obtained samples presented a high surface area and significant fraction of pores in the mesoporosity range. A good correlation was observed between the sequence of average pore size in mesoporous TiO2 and the micelle size of the used copolymer. A fine modulation of pore size and total volume was obtained by changing polymer type and concentration, effectively enhancing the photocatalytic properties of the oxide towards the degradation of methylene blue. The mesoporous oxides were also used as scaffolds to obtain Bi-promoted TiO2, resulting in a further increase of the photocatalytic performance (see below).
Another limitation of TiO2 as photocatalyst is its low quantum yield. Among the factors that concur to reduce the titania photocatalytic efficiency, the recombination of photogenerated electrons and holes plays a leading role by competing with the transfer of photogenerated charges to species adsorbed at the photocatalyst surface. Quantum yields could thus be improved by slowing down such recombination processes. The use of metal particles or mixed oxides with a suitable band structure has been proposed to slow down the recombination process. In fact, if the metal/second oxide has an available electronic level just below the conduction band of TiO2, electrons photogenerated on TiO2 are prompted to migrate to the metal/second oxide, thus enhancing the charge separation and slowing down the recombination process. Noble metals, such as Pt, have been extensively studied in the literature for this purpose and they have proven to be highly effective in enhancing the TiO2 photocatalytic activity. In my work, Bi2O3 was investigated as a cheaper alternative to noble metals to enhance the photocatalytic performances of TiO2. Bi2O3 is non-toxic and environmentally friendly material which, thanks to its band structure, could trap photo-generated electrons, and thus improve the overall quantum efficiency of the material. Theoretical calculations have shown that the specific band structure of Bi2O3-TiO2 could significantly improve the oxide photocatalytic efficiency. In my study, Bi2O3 was allowed to form into the mesoporous network of TiO2 samples obtained by surfactant template synthesis. The obtained materials were characterized by X-ray diffraction (XRD), N2 adsorption at subcritical temperatures (BET), high resolution transmission microscopy (HRTEM), Fourier transform infrared (FTIR) spectroscopy, and zeta potential determinations, providing an insight into the composite structure and into the specificity of the Bi2O3-TiO2 composites with respect to traditional sol-gel TiO2 nanomaterials. All samples were tested for the photocatalytic degradation of methylene blue stains and of formic acid under dry and wet conditions, respectively. The presence of Bi promotes the photocatalytic activity of the final samples in both tested reactions. Photocurrent measurements of Bi2O3-TiO2 composites were performed in order to assess any effect of the Bi addition on the fate of the photogenerated electron-hole pair. The obtained results agree with the observed marked enhancement in photocatalytic activity of the Bi2O3-TiO2 samples, showing an increased recombination time of photogenerated charges in Bi2O3-TiO2 composites. This effect may be related to the finely dispersed nature of Bi2O3 within the mesoporous network of the TiO2 scaffold.
A crucial aspect that needs to be addressed for the commercial application of TiO2 materials is their reusability, which is strictly connected to their efficiency in removing recalcitrant compounds. Real life effluents often contain a mixture of pollutants, some of which can be highly recalcitrant compounds. It has been observed that such recalcitrant pollutants or their degradation intermediates can strongly adsorb onto the TiO2 surface, irreversibly poisoning the photocatalyst. The deposition of titania particles in a thin layer is essential for the material applications because it simplifies the separation of the photocatalyst from the effluents and optimizes photon absorption. However, by reducing the available surface area, the deposition in films markedly increases the poisoning effects. A possible strategy to tackle this issue is the combination of photocatalysis with other oxidation techniques, in particular advanced oxidation techniques. In this thesis work, a combination of photocatalysis by TiO2 films and ozonation treatments was studied to achieve the complete oxidation of highly recalcitrant pollutants such as bisphenol A and cumylphenol. A specific deposition procedure of the TiO2 film onto a rough Al support was developed in order to obtain photocatalytic films with high surface area and good mechanical stability. Photocatalytic ozonation was compared to the separate photolytic, photocatalytic, and ozonation techniques to investigate the synergistic processes taking place in the combined treatment. The combination of the two treatments leads to synergistic effects that dramatically enhance the final mineralization of the pollutants. Moreover, the degradation pathway taking place during the photocatalytic ozonation of bisphenol A and 4-cumylphenol was studied by combining HPLC–MS determinations and FTIR analyses of the used catalyst.
The knowhow gained in the field of oxide synthesis and photocatalysis was then exploited in the development of oxide-based materials with tailored surface properties by means of surface functionalization with siloxanes. In recent years, hydrophobic modification of oxide surfaces has attracted growing attention because of its vast technological relevance. Siloxanes, compounds with the general formula R-(CH2)n-Si-(OR’)3, are among the functionalizing agents employed to modulate the surface energy, wettability and adhesion properties of oxides, thanks to their ability to form durable bonds with inorganic compounds, upon hydrolysis of labile –OR’ groups. Furthermore, siloxanes may serve as robust coupling agents between organic materials and the oxide for the preparation of a new class of hybrid nanocomposites showing interesting photophysical properties and applications.
Firstly, the role played by the structure of the siloxane molecule onto the wetting features of a smooth surface was investigated. The surface energy of different hydrophobing molecules, both fluorinated and unfluorinated, deposited in smooth layers over an inert substrate, was determined by analyzing contact angle values with literature models. The obtained values were compared with dipole moments determined by theoretical calculations employing semiempirical Hamiltonians, finding a close correlation between the calculated dipole moments and the polar components of the surface energy.
Siloxanes were then employed to functionalize TiO2 nanoparticles, in order to obtain rough composite films. The functionalization of nanometric TiO2 with siloxanes is even more promising as it has lead to a series of applications uniquely related to the peculiar features of this oxide. For instance, the photocatalytic activity of TiO2 can be exploited to create hydrophobic/hydrophilic patterns by irradiating a siloxane-TiO2 film with UV light through a suitable photomask, a procedure known as photocatalytic lithography. The siloxane is photocatalytically degraded in the areas exposed to UV light, while the siloxane monolayer remains intact in the areas covered by the photomask. The resulting hydrophobic/hydrophilic pattern can be exploited in numerous applicative fields, for example to promote the site selective condensation of water from the gas phase or the site specific adsorption of hydrophilic/hydrophobic molecules. In this study, the TiO2 surfaces functionalized by different siloxanes were tested in self-cleaning experiments. Further, patterned structures with tunable hydrophobic and oleophobic patches were obtained by exploiting the photocatalytic activity of TiO2 films. The resulting wetting contrast was exploited to obtain a site selective adsorption of a dye molecule, with a procedure that can be adapted to the site selective deposition or growth of a large variety materials, such as semiconductor quantum dots, polymers or biological molecules.
Notwithstanding the great interest and the manifold applications of these composite materials, the attachment of hydrophobizing molecules at TiO2 surfaces still remains poorly understood at the molecular level and hardly discussed in the literature. My research activity was aimed at filling the gap by investigating the fundamental features of bonding and structure of the siloxane layers onto TiO2 nanoparticle films. The influence of the siloxane amounts on the wettability and self-cleaning properties of TiO2 was studied, together with the role played by the hydrophobing molecule structure (aliphatic vs. aromatic side-chain, linear vs. branched, length of the side-chain, fluorinated vs. un-fluorinated molecules). The studied siloxanes were both commercial and laboratory-made, the latter synthesized by the research group of Prof. Benaglia (Dipartimento di Chimica, Università di Milano). The modes of attachment of siloxane molecules at the TiO2 surface were investigated by combining data of CP/MAS NMR with ATR-FTIR and XPS analyses, giving a detailed picture of the siloxane layer structure and interaction with the oxide. It appears that the attachment modes of silicon, besides changing with the siloxane content of the surface, are markedly affected by the siloxane structure. For instance, alkyl trifunctional siloxanes give rise, starting for low oxide coverage (9% w/w), to continuous functionalized layers in which silicon atoms are progressively bound by one, two, or three groups, these being either – O–Ti or –O–Si. These films are uniform and highly hydrophobic showing excellent self-cleaning properties at low contents; they present a Cassie-Baxter wetting behavior in which water drops float over a composite solid-gas carpet. The substitution of the alkyl chain with aromatic end groups favors localization versus spreading for the siloxanes, due to π-π stacking interactions. In these cases, the films, which are locally ordered, are less uniform on the whole. The bifunctional biaryl compound gives rise to layers which are initially, i.e., at low coverage, hydrophilic and end up to be hydrophobic at higher coverage. These are characterized by patch-wise localizations producing a wettability in which the water drops spread following the surface rough profile. Therefore, the structure of the siloxane appears to be a key parameter tuning the features of wettability of the surface by water.
Siloxanes are employed not only to modulate the wettability of oxides, but they can be exploited as linkers to attach new functionalities, such as dyes, biological molecules, and nanoparticles, to the oxide surface. By patterning the siloxane monolayer, a site-selective functionalization of the oxide surface can be obtained. Among the available patterning techniques, probe-based electro-oxidative lithography offers one of the best lateral resolution available (line width as narrow as 30 nm). So far, this technique has been applied almost exclusively to Si substrates. In order to fully exploit this technique, its application to other technologically relevant substrates is required. In the present thesis, probe-based electrooxidative lithography of octadecyltrichlorosilane (OTS) monolayers adsorbed on TiO2 and indium tin oxide (ITO) are reported for the first time. The conductivity of the layer and the environmental humidity are critical parameters, affecting the stability of the water meniscus between the probe and the substrate and thus the electro-oxidation process. The resulting surface functionalization was exploited to obtain the site selective growth of metal nanoparticles. The electro-oxidation mechanism was studied by advanced characterization techniques such as Scanning Kelvin Probe Microscopy (SKPM), and the oxidation processes taking place on Si, ITO and TiO2 were compared. For instance, in the case of OTS-ITO, a local overoxidation of the ITO substrate occurs simultaneously to the monolayer oxidation, whereas in OTS-TiO2, no overoxidation of the oxide substrate takes place.
This latter part of the work was carried out as collaboration between the group I belong to (Prof. Ardizzone’s group of the Università degli Studi di Milano) and the group of Prof. Schubert of the Friedrich-Schiller Universität, Jena (Germany), where I spent a 5-month research period followed by several short stays
Silver nanoparticles/nanostructured TiO2 interface: a photo-renewable “silver-ions electrode” for neurotransmitters detection
No full textSilver nanoparticles were embedded in a TiO2 (anatase polymorph) photoactive layer in a sandwich-like nanostructured electrode. [1-2]
The device was (photo)electrochemically characterized by cyclic voltammetry and electrochemical impedance spectroscopy.
In comparison with literature data on electrodes modified with silver nanoparticles [3-5], the new sensor presents a pronounced electrocatalytic effect on the silver oxidation peak together with a great increase in the current intensity.
Parallel plane-wave DFT calculations, performed using the VASP code [6], described the composite junction as a distorted bulk Ag structure, commensurate with the periodicity of the (101) face of the I41/amd TiO2 anatase polymorph. The silver atoms close to the semiconductor were found to gain a partially positive charge, quickly decreasing with the distance from the TiO2 surface.
Comparing the theoretical and experimental results it could be concluded that the device may be considered as a “positively charged silver nanoparticles-based electrode”, with positively ionized surface silver atoms protected by the titania layer, which holds a partial negative charge.
The final sensor performed efficiently in the electroanalytical determination of some neurotransmitters (e.g. dopamine, norepinephrine and serotonin) in simulated biological matrices (liquor, serum and urine). The optimized analytical methodology is not only characterized by high sensitivity and low detection limits (around 0.03 μM, which makes it appealing for clinical purposes), but also by high selectivity in the presence of high concentrations of conventional interferents (uric and ascorbic acids).
Last but not least, the fouling and passivation of the electrode surface, an unavoidable drawback during the detection of this kind of analytes, could be easily overcome by irradiating the device with UVA-light, which restored the initial sensor sensitivity. The photo-renewability allows to reactivate the sensor on site, i.e. directly in solution, to yield a system capable of working in continuous, able to be used in an integrated monitoring system.
References
[1] G. Soliveri, V. Pifferi, G. Panzarasa, S. Ardizzone, G. Cappelletti, D. Meroni, K. Sparnacci, L. Falciola, Analyst, 140, (2015), 1486 – 1494.
[2] V. Pifferi, G. Soliveri, G. Panzarasa, S. Ardizzone, G. Cappelletti, D. Meroni, L. Falciola, RSC Advances, 5, (2015), 71210 – 71214.
[3] O. S. Ivanova, F. P. Zamborini, J. Am. Chem. Soc., 132, (2010), 70–72.
[4] G. Chang, J. Zhang, M. Oyama, K. Hirao, J. Phys. Chem. B, 109, (2005), 1204-1209.
[5] S.E. Ward Jones, F.W. Campbell, R. Baron, L. Xiao, R.G. Compton, J. Phys. Chem. C, 112, (2008), 17820–17827.
[6] G. Kresse, J. Furthmüller, Phys. Rev. B, 54:11169, (1996).
Acknowledgements
This work has been supported by Fondazione Cariplo (Milano, Italy), grant no. 2014-1285. We acknowledge the CINECA and the Regione Lombardia award under the LISA initiative (grant SURGREEN) for the availability of high performance computing resources. We also thank the Chemistry Department for funding through the Development Plan of Athenaeum grant – line B1 (UNIAGI 17777)
Sol-gel synthesis of CaTiO3:Pr3+ red phosphors: tailoring the synthetic parameters for luminescent and afterglow applications
No full textPr-doped CaTiO3 (CaTiO3:Pr3+) is a promising candidate to substitute currently available red luminescent materials in applications such as LED displays [1]. Further, CaTiO3:Pr3+ is a red persistent phosphor, i.e. it exhibits a sustained red light emission for an extended duration after removal of the light source. While materials with blue or green afterglow emission are relatively common, red persistent phosphors are quite rare. As a result, CaTiO3:Pr3+ is a promising material for applications such as safety signage, sunlight storage and bio-imaging [2]. The control of the phosphor morphology is crucial for a wide range of applications, e.g. in bio-imaging and in LED and FED displays [3]. In this study, we propose new synthetic routes to tailor the morphology as well as the luminescence and afterglow properties of CaTiO3:Pr3+ for the desired application. Sol-gel syntheses were selected owing to their notable advantages with respect to the more commonly employed solid state reactions, e.g. lower reaction temperatures, higher homogeneity of the final product, and smaller particles. Two different sol-gel syntheses, followed by calcination, were investigated: one catalyzed by acetic acid and the other catalyzed by HCl in the presence of hydroxypropilcellulose (HPC) as morphology modulator. The role of the calcination temperature on the material properties was investigated in a wide temperature range (600-1200°C). The obtained samples were thoroughly characterized for their structural, morphological, optical and luminescence properties. The desired perovskite phase was obtained at a calcination temperature of 800°C or higher. The presence of HPC hindered crystallization at 600°C, while it influenced the morphological features at higher calcination temperatures. Photoluminescence measurements showed that the most crystalline samples presented the highest luminescence, irrespectively of the adopted synthetic approach. On the other hand, crystallinity had a more complex effect on persistent luminescence properties. While the samples calcined at the lowest temperature showed a negligible afterglow emission, the highest energy storage capability was exhibited by samples calcined at 800°C. The synthetic procedure played also a significant role in the afterglow emission: samples from the acetic acid synthesis are better candidates as red persistent phosphors. On the other hand, considering their high luminescent emission, low afterglow, and more porous structure, samples from HPC synthesis may be considered the most promising red phosphors for display applications
- …
