3,977 research outputs found
LC compensators for power factor correction of nonlinear loads
No full textThis material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Brunel University's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [email protected]. Copyright @ 2004 IEEEA method is presented for finding the optimum fixed LC compensator for power factor correction of nonlinear loads where both source voltage and load current harmonics are present. The LC combination is selected because pure capacitive capacitors alone would not sufficiently correct the power factor. Optimization minimizes the transmission loss, maximizes the power factor, and maximizes the efficiency. The performance of the obtained compensator is discussed by means of numerical examples
LC compensators based on transmission loss minimization for nonlinear loads
No full textThis material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Brunel University's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [email protected]. Copyright @ 2004 IEEEThis paper presents a method employing the penalty function search algorithm to determine the LC compensator value for the optimal power factor correction in nonsinusoidal systems. The objective of the proposed method is to minimize the transmission loss while the power factor and efficiency are taken as constraints and utilized in order to solve the multiobjective optimization problem by transforming it into a single objective one. Examples show that the load nonlinearity can have a significant impact on optimal compensator sizes
Cost-effective applications of power factor correction for nonlinear loads
No full textThis material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Brunel University's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [email protected]. Copyright @ 2005 IEEEThe objective of this paper is to propose a new approach for designing passive LC compensators by using the penalty function method as an optimization tool. The performance of the cost-effective passive LC compensator for a constant load depends on the appropriate inductor and capacitor selection. Several design methods are reviewed and a novel design methodology is proposed in this paper. By using the proposed method, the designer can quickly find appropriate parameter values to meet the desired circuit performance. Simulated results show that an appropriate combination of the inductor and capacitor selected by the proposed method can meet the desired power-quality requirement. Different cases of design examples are shown in this paper to verify the performance of the proposed design methodology
A 155W −95.6 dB THD+N GaN-based Class-D Audio Amplifier With LC Filter Nonlinearity Compensation
No full textSilicon MOSFETs-based medium-power (< 50W) Class-D amplifiers (CDAs) switching in the MHz range have gained popularity in recent years, which achieves better linearity thanks to a higher loop gain in the audio band while enabling the use of LC filters with higher cut-off frequencies. However, for high-power (>100 W) CDAs, such switching frequency and high load current could lead to significant power loss. Furthermore, in the presence of a large current and voltage applied to the load, the linearity of the system can quickly degrade due to LC filter component voltage/current dependency. Without any LC filter nonlinearity compensation technique, LC components with high voltage/current rating must be used to reach high system linearity, which are often expensive and bulky. This paper presents a CDA using a GaN-based output stage to achieve high switching frequency and good efficiency simultaneously, and an integrated controller implemented in a 180nm CMOS technology to compensate for the LC filter nonlinearity. Switching at 1.8 MHz, the CDA can deliver a maximum of 155W from a 50V supply into a load with a peak efficiency of 91.7%. It achieves a peak THD+N of −95.6 dB (0.0017%) while allowing the use of cheaper and smaller nonlinear LC components.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Electronic Components, Technology and MaterialsMicroelectronic
A - 121.5-dB THD Class-D Audio Amplifier With 49-dB LC Filter Nonlinearity Suppression
No full textClass-D audio amplifiers produce electromagnetic interference (EMI), which often needs to be suppressed by an external LC filter. However, due to component nonlinearity, this filter can itself cause significant distortion. This article presents a class-D amplifier that suppresses LC filter nonlinearity by 49 dB and is robust to ±30% variations in its cutoff frequency. This is achieved by a dual-loop architecture, in which an inner loop provides stability, while an outer loop provides the high gain needed to suppress the LC filter and output-stage nonlinearity. A prototype, implemented in a 180-nm BCD process, achieves -121.5-dB total harmonic distortion (THD) and -107.1-dB THD+N, which is maintained to within 3 dB even as the LC filter cutoff frequency is varied from 62 to 106 kHz. It can deliver a maximum of 21 W into a 4-Ω load with 87% efficiency and 12 W into an 8-Ω load with 91% efficiency, measured at 10% THD. Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Electronic InstrumentationMicroelectronic
FIGURE 3 in Briggsia hastingsi, a new genus and species of clingfish from Oman
No full textFIGURE 3. Cephalic sensory pores of holotype of Briggsia hastingsi (M.T Craig, following Briggs, 1993). PO—Post orbital canals, LC—Lachrymal canals, NC—Nasal canals.Published as part of Craig, Matthew T. & Randall, John E., 2009, Briggsia hastingsi, a new genus and species of clingfish from Oman, pp. 64-68 in Zootaxa 2271 on page 67, DOI: 10.5281/zenodo.19097
Facilitating functional annotation of chicken microarray data
No full textAbstract Background Modeling results from chicken microarray studies is challenging for researchers due to little functional annotation associated with these arrays. The Affymetrix GenChip chicken genome array, one of the biggest arrays that serve as a key research tool for the study of chicken functional genomics, is among the few arrays that link gene products to Gene Ontology (GO). However the GO annotation data presented by Affymetrix is incomplete, for example, they do not show references linked to manually annotated functions. In addition, there is no tool that facilitates microarray researchers to directly retrieve functional annotations for their datasets from the annotated arrays. This costs researchers amount of time in searching multiple GO databases for functional information. Results We have improved the breadth of functional annotations of the gene products associated with probesets on the Affymetrix chicken genome array by 45% and the quality of annotation by 14%. We have also identified the most significant diseases and disorders, different types of genes, and known drug targets represented on Affymetrix chicken genome array. To facilitate functional annotation of other arrays and microarray experimental datasets we developed an Array GO Mapper (AGOM) tool to help researchers to quickly retrieve corresponding functional information for their dataset. Conclusion Results from this study will directly facilitate annotation of other chicken arrays and microarray experimental datasets. Researchers will be able to quickly model their microarray dataset into more reliable biological functional information by using AGOM tool. The disease, disorders, gene types and drug targets revealed in the study will allow researchers to learn more about how genes function in complex biological systems and may lead to new drug discovery and development of therapies. The GO annotation data generated will be available for public use via AgBase website and will be updated on regular basis.</p
Multichannel LC ADC: to Record Atrial Electrograms
No full textBiosignals such as electoencephalogram (EEG), electrocorticogram (ECoG), atrial electrogram (AEG) etc. are being recorded from multiple channels simultaneously to improve the spatial resolution of the signals. Conventional multichannel synchronous Analog-to-Digital Converters (ADCs) are used to convert the analog continuous time signals into discrete digital values. Several biosignals have a sparsity in time domain as they have fast-rising peaks in between periods of low activity. Use of conventional synchronous ADCs for conversion of such signals is not an efficient approach as their operation is constant, irrespectiveof the activity of the input signals. Asynchronous ADCs such as level-crossing (LC) ADCs exploit the sparsity of biosignals and thus their operation is activity-dependent. However, multichannel configurations of LC ADCs do not yet exist. This problem is investigated in this work and a new ADC architecture is presented that can combine synchronous sampling with level-crossing quantisation method while converting input signals from several channels simultaneously. The synchronous LC ADC presented in this work achieves 3.37 times reduction in quantisation steps and 6 times reduction in number of output bits generated during conversion of AEG signals as compared to conventional synchronous ADCs. The problem in existing LC ADCs of data overhead in adaptive resolution technique is solved through a novel method named split resolution technique which is also presented in this work.Electrical Engineerin
Practical considerations regarding power factor for nonlinear loads
No full textThis material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Brunel University's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [email protected]. Copyright @ 2004 IEEEThe choice of LC compensator may be constrained by the availability of manufacturers units. To account for this, the capacitor values are chosen from among standard values and for each value the transmission losses is minimized, or power factor is maximized, or transmission efficiency is maximized. The global minimum or maximum is obtained by scanning all local minims or maxims. The performance of the obtained compensator is discussed by means of numerical examples
A -91 dB THD+N Resistor-Less Class-D Piezoelectric Speaker Driver Using a Dual Voltage/ Current Feedback for LC Resonance Damping
No full textPiezoelectric speakers are gaining popularity on account of their improving form-factor and audio quality, making them a good fit for many audio applications such as in televisions, laptops, etc. Such speakers can be modelled as a large capacitive load, and so are typically driven by a Class-AB amplifier via a series resistor that ensures driver stability, and limits load current, but wastes power [1], [2]. In [3], the Class-AB amplifier is replaced by a more power-efficient Class-D amplifier (CDA) in series with an additional inductor. However, a series resistor is still required to damp the resulting LC resonant circuit, which could otherwise draw excessive currents when excited by large-signal distortion (e.g. clipping) harmonics around the LC resonance frequency. Alternatively, by using a feed-forward architecture based on LC filter diagnostics to limit overshoot currents, the series resistor can be replaced by a second inductor, at the expense of increased system complexity and cost [4].Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Electronic InstrumentationMicroelectronic
- …
