6 research outputs found
Growing Lettuce (Lactuca sativa L.) in Floating Disk Systems Under Variable and High Salinity Ranges in Water Enriched with Nanobubbles
No full textHydroponic systems, which use commercial hydroponics technologies, are cheaper and easier to maintain than traditional farming methods in soil. The objective of this study was to evaluate various salinity ranges (E.C.i from 1 dS/m to 14 dS/m) in water enriched with nanobubbles (NBs) for the growth and productivity of lettuce plants in a floating disk hydroponic system. This research study investigated how using floating disks in a greenhouse with a nanobubble (NB) generator may affect lettuce’s (Lactuca sativa L.) morphological and physiological responses to salt stress. The goal of this experiment was to examine the results of the influence of NB and non-NB treatments on agronomic traits and yield. The results indicated that the NB device is an innovative and very effective technology for sustainable lettuce production under a high-salinity nutrient solution. This device presents a valuable solution to the global issue of the increased salinity of irrigation water
Investigation of Duplex Brass Membranes with Metallography, Permeability and Treatments: Work-Hardening, Annealing and Quenching
No full textThis paper consists of the fabrication and investigation of metal membranes and the study of their behaviour and applications in gas separation processes. The scope is to produce and characterize the porous crystal structure of brass alloy (standardization: DIN 17660) membranes and measure their permeability with helium as a penetrant medium. Another part of this study is to alter the brass alloy’s structure throughout metallurgical treatments and investigate how the permeability is allied to the structure’s alteration. This work merges the knowledge and technology of inorganic porous materials science in metallurgy. The novelty of the current research resides in the process to alternate the brass alloy structure throughout metallurgical treatments and how it is allied to the permeability of the membrane, which is of interest to be investigated. The results of the research are analysed and compared conducting the final inferences. All metallurgical treatments resulted in low permeability values when compared to a non-treated specimen. Specifically, the drop in permeance ranged from 76 up to 99.56%. It is noted that consecutive treatments contributed to even further decreases
Cement Composites with Graphene Nanoplatelets and Recycled Milled Carbon Fibers Dispersed in Air Nanobubble Water
No full textThe individual effect of nano- and micro-carbon-based fillers on the mechanical and the electrical properties of cement paste were experimentally examined in this study. The objective of the study was to separately examine the effects of size and morphology (platelets and fibers) of nano- and micro-reinforcement. Three different sizes of Graphene Nanoplatelets (GNPs), at contents of 0.05% and 0.20% and recycled milled carbon fibers (rCFs), at various dosages from 0.1–2.5% by weight of cement, were incorporated into the cementitious matrix. GNPs and rCFs were dispersed in water with air nanobubbles (NBs), an innovative method that, compared to common practice, does not require the use of chemicals or high ultrasonic energy. Compressive and bending tests were performed on GNPs- and rCFs-composites. The four-wire-method was used to evaluate the effect of the conductive fillers on the electrical resistivity of cement paste. The compressive and flexural strength of all the cementitious composites demonstrated a considerable increase compared to the reference specimens. Improvement of 269.5% and of 169% was observed at the compressive and flexural strength, respectively, at the GNPs–cement composites incorporating the largest lateral size GNPs at a concentration of 0.2% by weight of cement. Moreover, the rCFs–cement composites increased their compressive and flexural strength by 186% and 210%, respectively, compared to the reference specimens. The electrical resistivity of GNPs- and rCFs-composite specimens reduced up to 59% and 48%, respectively, compared to the reference specimens, which proves that the incorporation of GNPs and rCFs can create a conductive network within the cementitious matrix
Chitosan/Graphene oxide/SiO2 Nanoadsorbents for the Removal of Cr(VI) from Wastewaters
No full textThe swift industrialization and urbanisation have led to the discharge of significant amounts of hazardous heavy metals into water environments. Heavy metal pollution is currently one of the most significant environmental challenges being addressed, attracting researchers due to its biotoxicity, and non-biodegradability even at minimal concentrations [1]. Chromium (Cr) is among the most prevalent heavy metal contaminants. Its oxidation state, Cr(VI), harms the environment yet has catastrophic consequences for human health [2]. It is removed by physical and chemical procedures such as ion exchange, chemical precipitation and electrochemical treatment. Yet, most of these procedures have downsides, such as the formation of hazardous sludge, causing disposal issues and the need for costly tools and monitoring systems [3]. Adsorption is regarded an appealing and favourable technology because to its ease of design, simplicity, and high efficiency. Carbon-based nanomaterials have been investigated as superior adsorbents in aqueous solutions for the separation of organic and inorganic contaminants. The current study recommends the usage of adsorbents based on graphene oxide (GO). GO is an oxygen-rich material that is produced during the oxidation of graphite. It features hydrophobic areas due to aromatic groups in the nanosheets' centres, along with a large number of hydrophilic functional groups such as hydroxy, aldehyde, epoxy, and carboxyl groups [4]. The latter allow GO to swell and perform electrostatic functions. Chitosan (Cs) is a great adsorbent since it is inexpensive, is biocompatible, and causes no secondary pollution. Its molecular chains include -NH2 and -OH groups, which can interact with heavy metal ions and give significant adsorption capacity [5]. Silicon dioxide (SiO2) nanoparticles with graphene oxide have better physical and chemical characteristics than graphene oxide-like surface area. Similar research has revealed that the presence of SiO2 increases the adsorbent's adsorption capacity for Cr(VI) [6]. The effect of the pH value, contact time and initial chromium concentration was examined in order to determine the feasibility of Cs/GO@SiO2. Its structure and the morphology were studied in detail by the application of BET, XRD, FTIR and SEM techniques. According to the results, the modification of Cs with GO@SiO2 enhanced the percentage removal of chromium ions, especially, in acidic conditions by using 0.5 g/L of the adsorbent. Experimental data of equilibrium were used to calculate adsorption isotherms. According to thermodynamics the spontaneous nature of their adsorption was confirmed. Overall, the results indicate that Cs/GO@SiO2 can be effectively employed for removal of chromium from aqueous solutions
