186,939 research outputs found
Optimal design of a composite wing structure for a flying-wing aircraft subject to multi-constraint
No full textThis thesis presents a research project and results of design and optimization of a composite wing structure for a large aircraft in flying wing configuration. The design process started from conceptual design and preliminary design, which includes initial sizing and stressing followed by numerical modelling and analysis of the wing structure. The research was then focused on the minimum weight optimization of the /composite wing structure /subject to multiple design /constraints. The modelling, analysis and optimization process has been performed by using the NASTRAN code. The methodology and technique not only make the modelling in high accuracy, but also keep the whole process within one commercial package for practical application.
The example aircraft, called FW-11, is a 250-seat commercial airliner of flying wing configuration designed through our MSc students Group Design Project (GDP) in Cranfield University. Started from conceptual design in the GDP, a high-aspect-ratio and large sweepback angle flying wing configuration has been adopted. During the GDP, the author was responsible for the structural layout design and material selection. Composite material has been chosen as the preferable material for both the inner and outer wing components. Based on the derivation of structural design data in the conceptual phase, the author continued with the preliminary design of the outer wing airframe and then focused on the optimization of the composite wing structure. Cont/d
Letter from Leonard F. Wing (father) to his son Leonard F. Wing, 4 September 1945
No full textLetter from Leonard F. Wing (father) to his son Leonard F. Wing acknowledging receipt of his previous letter that he will not be getting a discharge, and that Leonard Wing (father) should be getting released within 3-6 months. He is about to leave for Japan, expecting to see his son there.Transcription may be subject to error
Letter from Leonard F. Wing to his father Leonard F. Wing, 27 August 1945
No full textLetter from Leonard F. Wing to his father Leonard F. Wing, letting him know that he received a promotion. Local news sources are speculating that Leonard F. Wing (father) will run for the Senate after he is dischanged. Leonard (son) hopes they are both discharged at the same time and can spend more time together
Letter from Leonard F. Wing (father) to his son Leonard F. Wing, 18 September 1945
No full textLetter from Leonard F. Wing (father) to his son Leonard F. Wing announcing that the 43rd Army will be demobilizing back to the U. S. and they will likely not see each other as planned. He mentions that he has not been feeling well but assures his son that the doctors are telling him not to worry. (Leonard F. Wing passed away from a heart attack in December, 1945.) He also relates the devastation in multiple Japanese cities.Transcription may be subject to error
Optimal design of a flying-wing aircraft inner wing structure configuration
No full textFlying-wing aircraft are considered to have great advantages and potentials in
aerodynamic performance and weight saving. However, they also have many
challenges in design. One of the biggest challenges is the structural design of
the inner wing (fuselage). Unlike the conventional fuselage of a tube
configuration, the flying-wing aircraft inner wing cross section is limited to a
noncircular shape, which is not structurally efficient to resist the internal
pressure load. In order to solve this problem, a number of configurations have
been proposed by other designers such as Multi Bubble Fuselage (MBF),
Vaulted Ribbed Shell (VLRS), Flat Ribbed Shell (FRS), Vaulted Shell
Honeycomb Core (VLHC), Flat Sandwich Shell Honeycomb Core (FLHC), Y
Braced Box Fuselage and the modified fuselage designed with Y brace
replaced by vaulted shell configurations. However all these configurations still
inevitably have structural weight penalty compared with optimal tube fuselage
layout. This current study intends to focus on finding an optimal configuration
with minimum structural weight penalty for a flying-wing concept in a preliminary
design stage.
A new possible inner wing configuration, in terms of aerodynamic shape and
structural layout, was proposed by the author, and it might be referred as
‘Wave-Section Configuration’. The methodologies of how to obtain a structurally
efficient curvature of the shape, as well as how to conduct the initial sizing were
incorporated.
A theoretical analysis of load transmission indicated that the Wave-Section
Configuration is feasible, and this was further proved as being practical by FE
analysis. Moreover, initial FE analysis and comparison of the Wave-Section
Configuration with two other typical configurations, Multi Bubble Fuselage and
Conventional Wing, suggested that the Wave-Section Configuration is an
optimal design in terms of weight saving. However, due to limitations of the
author’s research area, influences on aerodynamic performances have not yet
been taken into account
Influence of wing kinematics on aerodynamic performance in hovering insect flight
No full textThe influence of different wing kinematic models on the aerodynamic performance of a hovering insect is investigated by means of two-dimensional time-dependent Navier–Stokes simulations. For this, simplified models are compared with averaged representations of the hovering fruit fly wing kinematics. With increasing complexity, a harmonic model, a Robofly model and two more-realistic fruit fly models are considered, all dynamically scaled at Re = 110. To facilitate the comparison, the parameters of the models were selected such that their mean quasi-steady lift coefficients were matched. Details of the vortex dynamics, as well as the resulting lift and drag forces, were studied. The simulation results reveal that the fruit fly wing kinematics result in forces that differ significantly from those resulting from the simplified wing kinematic models. In addition, light is shed on the effect of different characteristic features of the insect wing motion. The angle of attack variation used by fruit flies increases aerodynamic performance, whereas the deviation is probably used for levelling the forces over the cycle.Aerospace Design, Integration and OperationsAerospace Engineerin
Preliminary fuselage structural configuration of a flying-wing type airline
No full textThe flying-wing is a type of configuration which is a tailless airplane accommodating all of its parts within the outline of a single airfoil. Theoretically, it has the most aerodynamic efficiency. The fuel consumption can be more efficient than the existed conventional airliner. It seems that this configuration can achieve the above mentioned requirements.
According to these outstanding advantages, many aircraft companies did a great deal of projects on the flying-wing concept. However, the application was only for sport and military use; for airliner, none of them entered production.
FW-11 is a flying-wing configuration airliner which is a design cooperation between Cranfield University and Aviation Industry Corporation of China (AVIC). Aiming the spatial economic and environmental needs, this 200-seat airliner would attract attention from airline companies for cost saving and environmental protection.
Before start, this program is designated for a new generation commercial aircraft to compete with the existing same capability airliner, such as Airbus A320 and Boeing 767. As the first team of this program, the aim is to finish the conceptual design and prepare the relevant document for next two teams that will perform preliminary and detail design.
As a member of FW-11 program and as part of the GDP, the author has been through the four conceptual design stages: engine manufacturers, aircraft family issues, structure design and the establishment of 3-D CAD model.
The aim of IRP study is to focus on the initial fuselage design
Analysis of composite wing structures with a morphing leading edge
No full textOne of the main challenges for the civil aviation industry is the reduction of its environmental impact. Over the past years, improvements in performance efficiency have been achieved by simplifying the design of the structural components and using composite materials to reduce the overall weight. These approaches however, are not sufficient to meet the current demanding requirements set for a „greener‟ aircraft.
Significant changes in drag reduction and fuel consumption can be obtained by using new technologies, such as smart morphing structures. These concepts will in fact help flow laminarisation, which will increase the lift to drag ratio. Furthermore, the capability to adapt the wing shape will enable to optimise the aerodynamic performance not only for a single flight condition but during the entire mission. This will significantly improve the aircraft efficiency.
The current research work has been carried out as part of the European Commission founded Seventh Framework Program called „Smart High Lift Device for the Next Generation Wing‟ (SADE), which main aim is to develop and study morphing high lift devices. The author‟s investigation focused on developing a design concept for the actuation mechanism of a morphing leading edge device. A detailed structural analysis has been carried out in order to demonstrate its feasibility.In the first phase of the research the attention was directed on the preliminary design and analysis of the composite wing box. The parameters of the key structural components, such as skin, spars, ribs and stringers were set to satisfy the static stress and buckling requirements. Moreover, numerical and experimental studies were conducted to analyse the static failure and buckling behaviour of two typical composite wing structural components: a spar section and a web and base joint assembly.
In the second stage of the research, a design for the morphing leading edge actuation mechanism was developed. The actuation system was designed in such a way that the target shape was reached with minimum actuation force demand. A geometrical nonlinear FE analysis was conducted to simulate the leading edge morphing deflection and ensure that structural strength requirements were satisfied. Furthermore, the behaviour of the skin integrated with the internal actuation mechanism was modelled under the aerodynamic pressure, at different flight conditions and gust loads, in order to prove that the proposed actuation system can compete with the conventional rigid rib.
This study demonstrated that a feasible morphing leading edge design for a next generation large aircraft wing can be achieved. Developing the readiness of this technology will have a significant impact on aircraft efficiency and considerable contribution towards a more environmental friendly aviation
Structural Analysis of a Dragonfly Wing
No full textDragonfly wings are highly corrugated, which increases the stiffness and strength of the wing significantly, and results in a lightweight structure with good aerodynamic performance. How insect wings carry aerodynamic and inertial loads, and how the resonant frequency of the flapping wings is tuned for carrying these loads, is however not fully understood. To study this we made a three-dimensional scan of a dragonfly (Sympetrum vulgatum) fore- and hindwing with a micro-CT scanner. The scans contain the complete venation pattern including thickness variations throughout both wings. We subsequently approximated the forewing architecture with an efficient three-dimensional beam and shell model. We then determined the wing’s natural vibration modes and the wing deformation resulting from analytical estimates of 8 load cases containing aerodynamic and inertial loads (using the finite element solver Abaqus). Based on our computations we find that the inertial loads are 1.5 to 3 times higher than aerodynamic pressure loads. We further find that wing deformation is smaller during the downstroke than during the upstroke, due to structural asymmetry. The natural vibration mode analysis revealed that the structural natural frequency of a dragonfly wing in vacuum is 154 Hz, which is approximately 4.8 times higher than the natural flapping frequency of dragonflies in hovering flight (32.3 Hz). This insight in the structural properties of dragonfly wings could inspire the design of more effective wings for insect-sized flapping micro air vehicles: The passive shape of aeroelastically tailored wings inspired by dragonflies can in principle be designed more precisely compared to sail like wings —which can make the dragonfly-like wings more aerodynamically effective
Conceptual design and optimization methodology for box wing aircraft
No full textA conceptual design optimization methodology was developed for a medium range box
wing aircraft. A baseline conventional cantilever wing aircraft designed for the same mis-
sion and payload was also optimized alongside a baseline box wing aircraft. An empirical
formula for the mass estimation of the fore and aft wings of the box wing aircraft was
derived by relating conventional cantilever wings to box wing aircraft wings. The results
indicate that the fore and aft wings would use the same correction coe cient and that
the aft wing would be lighter than the fore wing on the medium range box wing aircraft
because of reduced sweep.
As part of the methodology, a computational study was performed to analyze di erent
wing/tip n xities using a statically loaded idealized box wing con guration. The analy-
ses determined the best joint xity by comparing the stress distributions in nite element
torsion box models in addition to aerodynamic requirements. The analyses indicates that
the rigid joint is the most suitable.
Studies were also performed to investigate the structural implications of changing only
the tip n inclinations on the box wing aircraft. Tip n inclination refers to the angle the
tip n makes to the vertical body axis of the aircraft. No signi cant variations in wing
structural design drivers as a function of tip n inclination were observed.
Stochastic and deterministic optimization routines were performed on the baseline box
wing aircraft using the methodology developed where the variables were wing area, av-
erage thickness to chord ratio and sweep angle. The conventional aircraft design showed
similar performance and characteristics to the equivalent in-service aircraft thereby pro-
viding some validation to the methodology and the results for the box wing aircraft.
Longitudinal stability investigations showed that the extra fuel capacity of the box wing in
the ns could be used to reduce trim drag. The short period oscillation of the conventional
cantilever wing aircraft was found to be satisfactory but the box wing aircraft was found
to be unacceptable hence requiring stability augmentation systems. The eld and
ight
performance of the box wing showed to be better than the conventional cantilever wing
aircraft. Overall, the economic advantages of the box wing aircraft over the conventional
cantilever wing aircraft improve with increase in fuel price making the box wing a worthy
replacement for the conventional cantilever wing aircraft
- …
